CALL CART ACCOUNT

ITEMS IN CART: 0

$0.00

translate
Accessories
Accessories
  • How To Maximize Air Compressor Efficiency

    The Nail Gun Network proudly presents the following guest post, originally published on "Zero Sick Days" by RolAir:

    "The key to optimal air compressor efficiency is to maintain the integrity of your entire pneumatic system. This includes the air compressor, fittings, air hose, and tools. An efficient pneumatic system will ensure that you’re getting the air you need, when you need it. An inefficient one will cost you time and money. Follow the steps below to make sure your pneumatic system keeps operating the way it was intended to.

    RolAir Compressors Banner

    1. Use 3/8″ air hose whenever possible. All hoses cause some degree of frictional loss. While 1/4″ air hose is lighter and generally easier to work with, the smaller diameter restricts air flow more than a 3/8″ diameter hose would. If the CFM requirements of the tool(s) being operated is close to the air compressor’s limits, every bit of pressure counts. To ensure you’re getting the maximum amount of pressure to the tool, opt for a larger diameter hose. To get an idea of how air hose diameter affects working pressure, check out this handy Air Flow Calculator.
    2. Use shorter lengths of air hose. The idea here is similar to #1. The farther the air has to travel, the more pressure you lose. We completely understand that situations will arise when you are forced to use long runs of small diameter hose. When that happens, refer to the next step.
    3. Use an auxiliary tank. Adding an auxiliary tank in between two lengths of hose allows the user(s) to maximize distance from the compressor while minimizing frictional loss. For example, if you were to use two 3/8″ x 100′ air hoses, you’d be able to work 200′ from the compressor, but only lose pressure over the length of one 100′ section. The icing on the cake is the fact that the Air Keg can go where the compressor can’t, like on a pitched roof.
    4. Lubricate your pneumatic tools regularly. Just be careful what you put in them. The wrong type of lubricant can cause more harm than good by damaging o-rings and other internal components. The correct type of oil will be labeled as a tool lubricant and will contain special additives to promote long life for pneumatic tools. Of course, the obvious question is “How often?” That depends on the type of tool and how hard it’s being used, but for tools that get used daily, applying 4-5 drops at the start of each shift is a good rule of thumb.
    5. Check the system for leaks. This includes the entire air compressor, all fittings, air hoses and tools. Simply allow the compressor to build to top pressure with the air hose and all other tools and components hooked up. Once the compressor has stopped pumping, watch the tank pressure gauge and listen closely. If the needle stays put, you’ve got a leak-free system. If the needle starts to drop continuously (a slight drop is normal as the air cools) or you hear a hiss of air, you’ve got a leak. Excessive leaks in the system can cause your compressor to run more often than necessary, which leads to premature wear. If you have a difficult time locating the leak, we recommend spraying a soap and water solution on the hose and all fittings. A leak will cause the solution to bubble.

    Rolair on Nail Gun Depot

    Like anything else in the trades, a little bit of planning and preparation up front will pay dividends in the end. If you plan out your pneumatic system prior to each job and add steps 4 and 5 to your preventative maintenance plan, you’ll avoid a few headaches and maximize the lifespan of your equipment. If you feel like your pneumatic system is not performing like it should, give us a call and one of our service reps will help you troubleshoot the issue."

    Give these tips a shot and let us know if you see improved performance!

     

    ~The Team At Nail Gun Depot

    Read More
  • Corded Power – Cordless Freedom – Dewalt FLEXVOLT

    The folks at Dewalt have outdone themselves again, introducing an entirely new line of cordless batteries – coined the FLEXVOLT System. The first of their kind, these Dewalt batteries feature an intelligent design, capable of changing voltage when you change tools. The FLEXVOLT system is compatible with 20V MAX, 60V MAX and 120V MAX tools.

    FlexVolt Lightning

    The Dewalt DCB606 20V/60V MAX FLEXVOLT 6.0 Ah battery pack is designed with fifteen 4V MAX cells. Designed to run in either parallel or series mode, this battery is currently the most versatile in its class. In parallel mode, three sets of five cells connect in a parallel circuit. Each set provides 2 Ah (Amp Hour). Keep in mind, Ah is the amount of energy charge in a battery. This mode gives you a total of 20V MAX and 6 Ah for an increased run time.

    FLEXVOLT Chart

    The FLEXVOLT battery is engineered to run four times longer than a compact 20V MAX battery. To see a quick video demonstration of FLEXVOLT, click here.

    Dewalt FlexVolt Text Promo

    The series mode works a bit different. All 15 cells connect in a series to provide power for 60V MAX tools. The DCB606 automatically switches to this mode when you slide it into Dewalt’s 60V MAX brushless tools.

    parallel_battery

    The DCB606 battery pack can power all Dewalt 20V MAX cordless tools, including the DCN693B cordless metal connector nailer (DCN693M1 model if purchased with 20V battery), DCN692B cordless framing nailer (DCN692M1 model if purchased with 20V battery), DCN660B cordless finish nailer (DCN660D1 if purchased with 20V battery), as well as 60V and 120V MAX cordless tools. Additional features on this FLEXVOLT battery include an LED display that shows you the state of charge, single piece cell holder, and durable construction.

    series_battery

    For a quick, 60-minute charge of the FLEXVOLT battery, we recommend the Dewalt DCB118 fan-cooled fast charger. This battery charger is compatible with all 20V MAX batteries.

    FLEXVOLT HD 6AH Battery

    Dewalt has combined the power of corded with the freedom of cordless. Not just convenient, longer run time and more power translates to increased productivity and revenue. The FLEXVOLT system eliminates the constant hassle of charging and recharging your batteries, reducing downtime significantly. The Dewalt DCB606 is now available for pre-order only, with an anticipated release toward the end of August 2016.

    Will you power up with FLEXVOLT?

     

    ~The Team At Nail Gun Depot

    Read More
  • Paslode Transitions To Lithium-Ion Cordless Power

    Remember when Paslode first released its industry-changing cordless Impulse nailers? Nailing was never the same.

    Yet again, Paslode is raising the stakes, taking their cordless nailers into the 21st Century with lithium-ion power. Just like before, each Paslode cordless tool still requires a fuel cell to operate; but now offers better range and improved ergonomics. The transition was recently completed, when Paslode released their IM200-Li cordless brad nailer.

    Paslode IM200-Li

    "Why Choose Paslode Cordless? Paslode Cordless offers durable and lightweight solutions to your everyday work. Not only does Paslode Cordless offer more balance and control, but it was made to withstand the tough jobsite conditions. Paslode Cordless Systems were built to keep up with you." ~ Paslode.com

    Paslode IM250S-Li

    Let's take a closer look at the full Paslode Li-Ion cordless lineup:

    When it comes to framing, Paslode's cordless framing nailer has enjoyed one of the longest running success stories in the business. The current generation Paslode CF325XP, which recently replaced the CF325-Li, offers the same benefits as its predecessor, but with 15% increased driving power, low temperature usability (tool works in conditions down to 14 degrees Fahrenheit - when using all-season orange fuel cell), and up to 50% longer run time per battery charge. Eligible for Paslode's 2 Year Service Promise, the CF325XP (905600) is also backed by a standard five-year warranty. This Paslode framing nailer is tried, tested - and now better than ever before.

    Paslode CF325XP

    Paslode doesn't stop with framing. Now boasting a full line of Li-Ion cordless finish and trim nailers, the Paslode brand has come full circle. Choose between a 16 gauge straight IM250S-Li (916000), 16 gauge angled IM250A-Li (902400), and the most recent addition - an 18 gauge brad nailer IM200-Li (918000). All lithium-ion - all ready to work.

    Paslode 916000

    Like the CF325XP, these Paslode Li-Ion cordless finish nailers are lighter weight (easier to carry and use), can be recharged quicker, and hold their charge for a longer range of time. Don't forget, these Paslode cordless finish nailers do still require a small yellow fuel cell to operate.

    Paslode Cordless Nail Gun Depot Promotion

    To celebrate this milestone, for a limited time get a FREE Paslode Yellow Finish Fuel (816007) or Orange Framing Fuel Cell (816008), when purchasing ANY Paslode lithium-ion framing or finish nailer on Nail Gun Depot. Deal starts Friday (7/22/16) and runs while supplies last.

     

    ~The Team At Nail Gun Depot

    Read More
  • Win Your Nail Gun Depot Wishlist!

    Nail Gun Depot is celebrating its new website with a “Win Your Wishlist Giveaway.” That's right, we're giving away $1,000 toward your Nail Gun Depot wishlist! All you have to do is log in or create an account on Nail Gun Depot, fill out the entry form, and start building your dream wishlist.

    Nail Gun Depot Win Your Wishlist

    We kicked things off July 1st, and will continue through September 30th, 2016 - so there's plenty of time to get your entries in! But, the sooner the better - there's more than the grand prize up for grabs!

    We'll be giving away several small prize packs, as we count down to the grand prize drawing for $1,000.00 in Nail Gun Depot store credit. Our grand prize winner will have the opportunity to purchase items directly from their personalized Nail Gun Depot wishlist.

    Nail Gun Depot Wishlist

    Don't forget, the grand prize drawing will take place on September 30th!

    ~The Team At Nail Gun Depot

    Read More
  • What Cordless Nail Gun Should I Buy?

    It's hard to ignore the increasing presence of cordless tools coming to market. Today, let's take a look at those different types of cordless nailers. We'll look at brand, product application, and variation(s) of cordless technology available. Let's start by breaking down the core categories of cordless.

    Senco Cordless Battery

    Framing Nailers & Metal Connecting Nailers

     

    Cordless framing nailers have improved quite a bit since the first Paslode Impulse tool was released in July of 1986 - nearly 30 years ago to the day. Today, Paslode cordless tools have improved in every possible way: lighter body, longer battery life, quicker recharge time and more. The CF325XP (905600) is Paslode's current contender in a long running legacy of cordless framing tools. Powered by lithium-ion battery and orange framing fuel cell, the CF325XP is designed for heavy-duty, everyday use.

    Paslode CF325XP

    While Paslode has dominated this segment of the market for many years, another key player is quickly gaining notoriety for their contractor-grade cordless technology. That's right, we're talking about our friends at Dewalt. Currently on their second generation lithium-ion framing tool, Dewalt's MAX XR battery boasts more power and longevity than ever before. Dewalt has also managed to eliminate the need for a fuel cell, without compromising performance. Dewalt's system is as simple as plug-and-play. With the recent release of their DCN693M1 cordless metal connecting nailer - the first of its kind - we've got a hunch this won't be the last cordless nailer from Dewalt.

    Our Recommendation:

    If you don't mind occasionally replacing a fuel cell, Paslode has led cordless framing sales for decades. For tried and tested quality, Paslode is a sure shot.

    Dewalt DCN693 App

    If you're looking for the latest technology, there's no doubt that Dewalt offers a game changer. The MAX XR battery system eliminates the need for fuel cell, and offers improved driving force and length of time between charging cycles.

     

    Finish & Brad Nailers

     

    Unlike the cordless framing market, you'll see a lot more competition when comparing cordless finish and trim nailers. Two main factors dictate the widespread growth for this segment of the industry - market share and tool design. Generally speaking, the market for finish and trim nailers is infinite. Between contractors, weekend warriors, and woodworking hobbyists, there is always a demand for finish nailers. Paired with the fact they require much less energy to drive small finish or brad nails into place, you have a recipe for success.

    Grex Cordless Comparison Side-By-Side

    Just like the framing nailers above, most cordless finish nailers come in the same two variations, either with fuel cell and battery, or powered by battery only. Grex recently launched the GC1850 cordless brad nailer, which is powered by fuel cell and AAA battery power only! Don't worry about constantly replacing those AAA's in the Grex either, this cordless brad nailer is rated to run up to 50,000 shots per battery cycle.

    Looking at fuel cell finish nailers, Paslode once again leads the industry with its lineup of lithium-ion tools. Introduced to replace the aging line of Paslode Impulse nailers, these new lithium-ion powered tools are lean and efficient. The most recent addition to Paslode is their all-new 18 gauge brad nailer, the IM200Li (918000). Featuring several benefits over its predecessor, the Paslode IM200-F18 (901000), the IM200Li lithium-ion brad nailer offers a lightweight design, long-range battery life, battery standby position to conserve charge, tool free depth adjustment, reversible belt hook, and no mar tip - among other benefits.

    Dewalt DCN660D1 App

    Moving away from the fuel cell, Senco and Dewalt continue to battle for control of the battery-only market. A long-time leader in innovation, the Senco Fusion is available in four cordless variations ranging from 15 gauge finish nailer down to 18 gauge brad nailer. The Senco Fusion cordless system continues to receive praise for its innovative features and proprietary design. However, Dewalt recently answered the demand for better, more powerful batteries when they introduced the 20V MAX lithium-ion battery pack. Built to compete with Senco's Fusion, we've seen a growing demand for Dewalt's new product(s) - which includes their DCN660D1 16 gauge cordless finish nailer.

    The Verdict:

    Only time will tell the ultimate winners in this extremely competitive segment of cordless tools. As new technology continues to emerge, we expect to see several new products come to market in the next calendar year. We also predict a full transition to lithium-ion batteries, for those brands still offering NiCad models or similar.

    Senco Fusion F-15

    And, if you're a diehard air tool enthusiast, there's good news for you too. Despite advancements in cordless technology, we don't foresee pneumatic tools fading into the abyss any time soon. With a network of contractors and tradesmen that swear by pneumatic nailers and staplers, we have a hunch these tools will also benefit from enhanced technology and performance.

    So, would you consider cordless?

     

    ~The Team At Nail Gun Depot

    Read More
  • Not Your Father's - Father's Day Gift Guide 2016

    Having a hard time picking out the perfect gift for Dad? Break from the norm and surprise him with a gift he can actually use - something that bundles tech savvy features and functional form. Unfortunately, that means no personalized coffee mugs on our list this year - we had to make room for these popular new gadgets. With price points that meet both large and small budgets, take Dad into the 21st Century with one of our top picks for Father's Day 2016.

      • Cadex Digital Regulator ($55): Budget friendly and compact, the Cadex DAR-02E digital air pressure regulator is perfect for Dad's workshop. Easy to mount and built for precision control, this Cadex regulator can connect directly to air tools and pneumatic spray guns. Designed to regulate the air coming through an air hose, this digital system features an impact resistant housing, electronic gauge shutoff for battery preservation, and a 1/4" universal thread swivel nut that fits most spray guns, nailers and air tools. A 1/4" universal thread male inlet fitting can be found on the opposite end of the DAR-02E.

    cadex digital regulator

      • Senco DuraSpin SG2510 Screw Gun Motor ($105): Next on our list, the Senco DuraSpin SG2510 (6X0002N) electric-powered screwdriver is designed for applications in drywall, wood fastening, and steel - perfect for the dad that has his hands in a variety of projects. This high-performance screw gun motor features a high-torque, 0-2500 RPM variable-speed motor for heavy-duty use. The SG2510 is constructed from industrial-grade metal, rugged enough to handle contractor-grade projects when needed. Features such as a trigger lock for continuous operation and an industrial-grade 10" cord round out the package. A member of the Senco DuraSpin family, the SG2510 screw gun works with Phillips and Square drive bits.

    Senco 6X0002N screw gun motor

    • Stabila 24" Tech Level ($249.99): Not your Father's level, the Stabila 24" Tech/Electronic IP65 level features electronic measuring technology, two digital displays, an audible inclination guide, IP 65 dust and waterproof housing, and removable shock-absorbing end caps with anti-slip wall grips. Get precise slope measurements as needed for ADA 4.8.2 handicap ramp compliance. A dual screen set-up (front & top) allows easy viewing from any angle. Electronic displays illuminate for easy viewing in low light conditions, and include five display modes. Other features include instant measurement conversion to any scale, audible tones for sight free use, one button calibration, and carrying case. Snap in two AA batteries and Dad will be ready to go.

    Stabila Tech Level

    • Dewalt DCN660D1 Cordless Finish Nailer ($399): A big step in cordless nailing, the Dewalt DCN660D1 runs on 20V lithium-ion battery power exclusively - in other words, no more fuel cells. This cordless finish nailer is compatible with 1-1/4” to 2-1/2” 16 gauge angled finish nails. Featuring Dewalt's first-ever 20V MAX brushless motor - enjoy better run-time, a lighter-weight body (27% lighter than the current DC618), and a more compact design for hard to reach areas. Did we mention it drives up to 4 nails per second? Other features include a tool-free depth adjustment, tool-free jam release, tool-free stall release, multi-functional LED lights, select actuation (choose between bump and sequential fire), adjustable belt hook, no mar tips, and trigger lock-out. The DCN660D1 comes with one battery, charger, manual and carrying case - so Dad can plug it in and go straight to work.

    Dewalt DCN660

    • Paslode CF325XP Cordless Framing Nailer ($399): For the dad that dabbles in heavy carpentry, Paslode has our vote for best Father's Day present. The new Paslode CF325XP (905600) Li-Ion cordless framing nailer combines the latest cordless technology with a tried-and-tested design. No hose or compressor required - the CF325XP runs on lithium ion battery-power with orange framing fuel cell. Similar to the Paslode CF325-Li, the CF325XP offers the same benefits from Paslode, but with 15% increased driving power, low temperature usability (tool works in conditions down to 14 degrees Fahrenheit when using all-season fuel cell), and up to 50% longer run time per battery charge. This tool is also eligible for Paslode's 2 Year Service Promise, when registered properly with Paslode. For added peace of mind, the CF325XP also comes with a five-year limited warranty through Paslode. Other features on this Paslode 905600 cordless framing nailer include aggressive teeth for toe nailing, compact design – fits between 16″ o.c. studs, joists and roof trusses, battery standby, tool-free depth of drive adjustment, utility hook, nail lockout to prevent blank drives, and a stainless steel magazine raceway for improved durability and easy loading. This Paslode cordless framing nailer comes with rugged plastic carrying case, rechargeable lithium ion battery and charger, safety glasses, owner's manual and 5/32" hex wrench - and is excellent for applications in framing, sheathing, floor decking and more.

    Paslode CF325XP

    • Grex GC1850 Cordless Brad Nailer ($438): For that sweet spot between the Dewalt finish nailer and the Paslode framer, give Dad a different kind of cordless nailer this year. The first of its kind, the Grex GC1850 cordless brad nailer is powered only by 2 AAA batteries and fuel cell; designed to drive 18 gauge brad nails up to 2" in length. The Grex GC1850 is the only cordless finish nailer that is as small as a traditional air operated finish nailer, while also offering a light-weight metal body, the power to sink 2” brad nails into 2” thick red oak, and a low cost of ownership. Powered by 2 AAA alkaline batteries - capable of lasting at least 50,000 shots - and a fuel cell that lasts approximately 1,300 shots per cartridge, this cordless brad nailer eliminates the downtime that comes with charging a battery - without sacrificing power. Easy to maintain, the GC1850 features a self-lubricating piston ring and cylinder, as well as easy driver replacement. An all-metal body proves best for improved durability, reliability and heat dissipation. No compressor required, the Grex GC1850 cordless brad nailer also features a safety nose with no-mar tip, anti dry-fire lock-out, power adjustment and reversible belt hook. A handy tool for any dad that enjoys weekend woodworking projects including trimwork, cabinet assembly, jig fixtures, light wood assembly, paneling, window beading, door and window casings, or picture frame assembly.

    Grex GC1850

    A Father's Day gift to all, use promo code FIVEOFF during checkout to receive 5% off your entire order!

    Wishing a Happy Father's Day to you and yours,
    The Team At Nail Gun Depot

    Read More
  • The First-Ever AAA Battery-Powered Nailer Is Here

    A game changer in finish and trim woodworking, have you heard about Grex Power Tools' all-new GC1850 cordless brad nailer? An industry first, the Grex cordless brad nailer boasts a compact design – without sacrificing power, quality or versatility.

    Grex GC1850

    Innovative yet practical, the GC1850 is powered by 2 AAA alkaline batteries and an individual fuel cartridge. The tool is rated to run at least 50,000 shots per battery life-cycle, while each Grex fuel cartridge holds approximately 1,300 shots of odorless compressed gas – with no expiration date. Eliminating a bulky battery, the Grex GC1850 is comparable in size and weight to most other pneumatic brad nail guns.

    Grex Cordless Comparison Side-By-Side

    Protected by a robust metal body, and engineered for easy, low-cost maintenance, this Grex 18 gauge brad nailer also features the following key points:

    • Self-lubricating piston ring and cylinder; Easy driver replacement
    • All-metal body for better durability, reliability and heat dissipation
    • Power to sink two inch brad nails into two inch thick Oak
    • Safety nose with No-Mar tip
    • Anti dry-fire lock-out with ability to adjust driving power

    Grex Cordless Comparison

    The GC1850 addresses an age-old concern among trim carpenters and woodworkers - the need for a lightweight, cordless finish nailer. One matching the benefits of other competing models – without sacrificing the ergonomics of an air tool. This Grex cordless is the first to do both.

    Grex GFC01 Fuel Cell

    MSRP for the Grex GC1850 is $499, though you can find it on Nail Gun Depot with a $438 launch price. Fuel cells are available in packs of four, which run about $25.

    Need to see more? Check out this "Quick Start" video tutorial demonstrating how to use the Grex GC1850.

    So, is it time to get your Grex on?

    ~The Team At Nail Gun Depot

    Read More
  • Introducing The All-New Nail Gun Depot Website

    Welcome to the all-new Nail Gun Depot - your everything source for fastening and construction supply. Whether you're looking for a tool, fastener, how-to advice or expert tips - we've got it all. With competition online as fierce as ever, we're going the extra mile for our customers - ensuring you get the right product for your project, at a competitive price.

    Nail Gun Depot Website

    Don't take our word for it, check out some of the great new features all visitors can enjoy on Nail Gun Depot:

    • Search The Nail Gun Network: The new Nail Gun Network has truly become a site within a site. More than a blog, choose between how-to articles, video demonstrations, manufacturer bulletins, tool news, expert tips and so much more. We've listened to you, and have designed our Nail Gun Network to offer each user a personalized experience.

    NGN NEW SITE

    • Navigate On Your Smartphone: We've finally gone mobile. Shop Nail Gun Depot from any smartphone or tablet via our new mobile layout. Get the same great information from your desktop computer - now at the tip of your finger.

    MOBILE NEW SITE

    • Shop By Project Type: For customers that don't quite know what they need, but know what they need to do, visit Nail Gun Depot's new product recommendation tool - Shop By Project. Another way to search for products, we've sorted items by the applications they are designed to excel at. With categories for concrete, decking, upholstery and more, let our Shop By Project tool pair you with the right items for your job.

    SBP NEW SITE

    • Browse The Fastener Finder: Along with the rest of Nail Gun Depot, we've given our one-of-a-kind Fastener Finder app a face-lift. Know which tool you own, but not sure what fasteners will work with it? Simply select the brand and model of your tool from the drop down menu, and let our Fastener Finder do the rest. With an expanded selection of both late-model tools and new release items, choose between more than 7,500 different product combinations.

    FF NEW SITE

    • Explore Our Freight Shipping Program: Want to buy in bulk, but not pay standard shipping rates? We have a solution for that. Nail Gun Depot now offers common-carrier, freight shipping options during checkout. Buying a skid of nails? Simply choose the freight quote that best suits you during checkout. Our logistics team will do the rest - making sure your products arrive without hassle.

    LTL NEW SITE

    • Enjoy Enhanced Customer Profiles: The new Nail Gun Depot is designed to optimize user experience from top to bottom. We've gone the extra mile to make sure our customers enjoy a seamless experience while visiting the site. Store contact information, reorder with the click of a button, manage customer preferences, submit product reviews, save products to order later, and more.

    ACCOUNT NEW SITE

    • Build A Custom Wishlist: Want a new tool, but not quite ready to place an order? Save it for later with Nail Gun Depot's new wishlist builder. Located within your user profile, store any product on the site for later, save comments on each item, and even share your wishlist with others via email.

    WISHLIST NEW SITE

    Want more? We've only just begun. Stay tuned as we continue to expand our product selection, and roll-out new features on Nail Gun Depot. Whether you're a contractor, expert, DIYer, amateur - or anywhere in between - we've got something for everyone on Nail Gun Depot and The Nail Gun Network.

    Have questions, comments or feedback, drop us a line at sales@nailgundepot.com.

     

    ~ The Team At Nail Gun Depot

    Read More
  • The Nail Gun Network's Most Memorable Posts - 2015

    At last - the end of 2015. What better way to capture the essence of 2015 at Nail Gun Depot, than to take a look at some of the Nail Gun Network's most influential blog posts of the year. Check out some of our most popular posts from 2015!
    Best of Nail Gun Network 2015
    NGD's Top Picks: Hall of "Frame"
    1. Nail Gun Depot Is Celebrating Its 15th Anniversary: It's hard to believe Nail Gun Depot has been around for 15 years. Launched in 2000, the site has played its part in the explosion of Internet and e-commerce. From nailers to staplers, screw guns and fasteners, we've got something for everyone.
    2. The Nail Gun Network Media Guide - We're Expanding To Video: The majority of our Nail Gun Network subscribers have come to expect weekly - and the occasional bi-weekly - blog updates announcing tool news, product demonstrations, tutorials and project tips. Now, they can expect even more, as we are pleased to announce the launch of our NGN video blog.
    3. Maintaining Pneumatic Tools & Compressors For Cold Weather: If you live in a region susceptible to winter weather, as most North Americans do, it's crucial that your pneumatic tools and air compressors are properly maintained for the cold. Protect the integrity and performance of your tools or compressor from the freezing cold.
    4. Why Every Contractor Needs A Laser Level: The principles of measurement in the construction industry have remained unchanged for hundreds - if not thousands - of years; but materials, assembly procedures, the interaction between various trades - not to mention time and cost pressures, have changed. The precise reason why every contractor should be using laser measuring instruments now, more than ever.
    5. Choosing A Staple Gun For Your Project: Learn the difference between gauge and crown, what makes one type stapler different from another, and most importantly, which stapler is the best one for you. We'll explore applications, tools, fasteners and more.
    Viewer's Choice: Most Popular
    1. Everything You Need To Know About Cordless Nailers: Are you looking for a cordless nailer, stapler or screw gun? While pneumatic tools will always have a place in construction, several contractors and DIYers have come to adopt cordless fastening tools over their air-powered counterpart.
    2. How To Avoid Destroying Your Pneumatic Nailer: Take a look at some professional tips to extend the life of pneumatic tools. Learn how to protect your air fastening tools - here on the Nail Gun Network.
    3. Introduction To Air Compressors: If you use pneumatic fastening tools, an air compressor will bring them to life. Air compressors provide power to your pneumatic nail guns, staple guns and other air-driven tools. The applications you need an air compressor for determine the type of compressor required.
    4. Introducing Dewalt's DCN660 Series Cordless Finish Nailer: Dewalt fans rejoice. Introducing the widely anticipated DCN660, 20V MAX 16 gauge cordless angled finish nailer, by Dewalt. A game changer for the brand, the DCN660 series runs exclusively on lithium-ion battery power - eliminating the need for fuel cells, regular cleaning and related maintenance. Just snap the battery into place and start working.
    5. What Type Of Air Hose Do I Need For My Compressor: You've purchased a new pneumatic tool, go to hook the tool up to your air compressor, only to find out you don't have the right air hose to connect your tool. You ask, what type of air hose do I need for my compressor? The question is simple - the answer, a bit more complex. Let's explore what type of air hose will suit your application best.
    And with that, we conclude our last post of 2015. Don't worry, we're only taking a break from blogging for a few weeks - making time to celebrate the holidays with friends and family, AND launch the Nail Gun Network's all-new home. Look for an all-new, refreshed and revitalized Nail Gun Network - coming January 2016!

    ~The Team At Nail Gun Depot

    Read More
  • Nail Gun Depot's 2015 Holiday Gift Guide

    What new tool would you choose for your favorite woodworker, craftsman, or contractor this holiday season? What about the hobbyist that has it all? Nail the 2015 holiday season - giving the gift of tools. We're making merry on the Nail Gun Network this year. Check out our top gift picks for the holidays, and steal a deal for yourself, family and friends.
    Nail Gun Depot's 2015 Holiday Gift Guide

    Under $100

    • Spotnails PS7116 Upholstery Stapler: The Spotnails PS7116 air-powered upholstery stapler drives 5/32" to 9/16" 22 gauge 3/8" crown staples. Includes one-year warranty and rugged plastic carrying case. Features a front exhaust, and lightweight design for added comfort. New design boasts improved overall performance. Applications for this upholstery stapler include bedding, automotive vinyl, insulation, general upholstery, packaging, speaker grills and wire screen insulation. A holiday bonus, all Spotnails upholstery staplers sold between now and December 31st, 2015 are eligible for a free staple remover with purchase - while supplies last. Get it all - $69!
    • Freeman PPPBRCK 2-Tool Trim Kit: The PP123 23 gauge micro pinner and PBR50Q 18 gauge brad nailer, two-piece finish and trim combo kit from Freeman Tools, is perfect for any value-driven woodworker. Don't sacrifice quality for cost - get both with Freeman's line up of finish and trim tools. For added peace of mind, all Freeman tools come with a seven-year manufacturer's warranty. In addition to the brad nailer and micro pinner, this kit includes a canvas carrying bag and fasteners for each tool. The Freeman PBR50Q 18 gauge brad nailer, which drives 5/8" to 2" straight brad nails, is perfect for applications that include trim installation, cabinet building, panel installation, furniture repair, baseboard mounting and more. The PBR50Q brad nailer features 360 adjustable exhaust, air filter, aluminum magazine and cylinder design, finger depth adjustment, quick jam release, and no-mar tip. The Freeman PP123 23 gauge pin nailer, which drives 1/2" to 1" headless pin nails, is excellent for small trim, cabinet doors, picture frames, craft building and more. The PP123 headless pinner features an aluminum magazine and cylinder, internal air filtration, comfort grip handle, and safety lock - among other features. Now on Nail Gun Depot for $99.99!
    • Stabila 24" Type 196LED Lighted Level: The Stabila 39324 Type 196LED "The Lights" spirit level, 24" in length, includes optimal clarity - provided by two illuminated, easy to read vials and two removable light packs. LED light packs double as convenient flash lights. No wires or light bulbs go bad in the frame. Easily replaced AAA battery provides 5 hours of continuous use (approx 600 uses). Dependable magnetic switch with large button is easily accessed, even with gloved hands. Other features include auto shut off after 100 seconds and IP54 dust and waterproof rating. One Horizontal (level) and two Vertical (plumb) vials - vials are guaranteed for life. Never worry about hanging a crooked stocking again, grab yours now for only $89.99!
    Spotnails Upholstery Staple Remover Deal

    $100 - $250

    • Senco PC1010 Air Compressor: At 20 lbs., the Senco PC1010 oil-less air compressor features an extremely lightweight and ultra quiet design. Includes one-year warranty. This hand carry compressor also features an electric direct drive motor for increased efficiency, aluminum cylinder, oil-less pump, 1/4" coupler, and cushioned hand grip. The PC1010 is great for finish and trim work, upholstery, hobbies and crafts. Grab one now for $119 on Nail Gun Depot.
    • MAX CN445R2 Roofing Nailer (replaced by MAX CN445R3): The MAX CN445R2 SuperRoofer coil roofing nailer drives 15 degree wire collated roofing nails from 3/4" to 1-3/4" in length. The lightweight CN445R2 roofing nailer features a rapid fire trigger with minimal recoil, tar resistant nose, powerful motor for hardwoods or re-roofing, removable contact foot for easy cleaning, magnetic nose to prevent jamming, adjustable depth of drive, and maintenance free end cap filter. A vinyl siding kit, sequential trigger kit, and anti-double fire kit are available separately. This MAX coil roofing nailer is excellent for everyday roofing, siding, box assembly and tile board applications. A limited-time holiday bonus, get a FREE MAX spotlight when purchasing the CN445R2 for $219 on Nail Gun Depot - while supplies last.
    • Stabila 03160 LA5P 5-Point Layout Laser: The Stabila 03160 Type LA-5P LaserBob five point laser includes a laser, target plate, wall mount bracket, high stability framing base, manual and pouch. Pendulum lock for added protection during transport and storage. Features an integrated V-groove rare earth magnet mount, an adjustable base that lifts the laser over its tracks and bottom plates, plumb points up and down, 100 ft. visible range, and self-leveling design. Regularly listed for $349.99, get a limited-time holiday price of only $249.99 on Nail Gun Depot.
    MAX CN445R2 Spotlight Deal

    $250 & Over

    • Senco Fusion Finish or Brad Nailers: Purchase any Senco Fusion finish or brad nailer between now and December 29th, get a FREE spare battery - while supplies last. Choose between the Senco Fusion 15 gauge finish nailer, 16 gauge straight finish nailer, 16 gauge angled finish nailer, or 18 gauge brad nailer. All cordless - powered by 18V lithium ion battery. Models starting at $339 on Nail Gun Depot.
    • Grex GPK01 or Cadex CPB21/23K: For a limited-time, choose between Grex and Cadex Pinner Playoff bundles, only available on Nail Gun Depot. First up, the Cadex CPB21/23K 21 & 23 gauge pin nailer combo kit includes one CPB21.50 21 gauge pinner, and one 23.35 23 gauge micro pinner, sample air tool oil - and comes in a rugged systainer case for added protection. For the Grex fanatic, grab a Grex GPK01 P635/1850GB promo bundle, which includes one P635 pin nailer, one 1850GB brad nailer, one P6/MP-3 variety pin pack (500 ct.), one P6/MP-L variety pin pack (500 ct.), and one GBN18-MP variety brad pack (500 ct.). Pick your favorite, both bundles are available through end of year on NGD, $369 each.
    • Hitachi NV83A4 Coil Framing Nailer: The Hitachi NV83A4 air-powered coil framing nailer, item# NV83A4, drives 2" to 3-1/4" full head wire collated coil nails. Light enough for one-handed operation, this Hitachi nail gun is excellent for a variety of high production tasks. Features an aggressively hardened safety to reduce wear, selectable trigger for bump fire or sequential operation, and rubber-molded hand grip. Applications for the Hitachi NV83A4 nail gun include high production framing, sheathing, decking, sub-flooring and pallets. Get a FREE 7-1/4" saw blade when purchasing ANY Hitachi framing nailer between now and the end of the year - while supplies last. A quality tool, get your NV83A4 for $379.00 on Nail Gun Depot.
    Senco FREE Spare Battery Deal
    With choices like these, whether you're looking for a Stocking Stuffer - or want to be the best Secret Santa ever - there's something for everyone on Nail Gun Depot. With over 2,000 products available, shop NGD year-round for everything fastening - and more. Don't forget, fastening tools come with FREE ground shipping to most U.S. states, so be sure to place holiday orders early to avoid late delivery.
    ~Happy Holidays From The Team At Nail Gun Depot
    **Prices and offers listed are not guaranteed, and are based on availability.
    Read More
  • Items 21 to 30 of 41 total

    1. Page
    2. 1
    3. 2
    4. 3
    5. 4
    6. 5
    7. of 5
Copyright © 2017 Nail Gun Depot All rights reserved. All trademarks and brands are property of their respective owner