CALL CART ACCOUNT

ITEMS IN CART: 0

$0.00

translate
Collated Screw Systems
Collated Screw Systems
  • Screw Gun Showdown - Simpson's Quik Drive Screw System

    February is remodeling month at Nail Gun Depot - and what better way to celebrate remodeling month than by kicking off our FIRST-EVER Screw Gun Showdown. If you work in a renovation or remodeling trade, chances are you've used either a Quik Drive « screw system and/or a Senco DuraSpin « screw gun. Used for drywall installation, deck building, metal roofing, general construction and much more - both screw systems are top-rated in their class - but which one is right for you? You can learn more about Simpson's Quik Drive, and Senco's DuraSpin - right here on the Nail Gun Network.
    Screw Gun Showdown
    For part-one in our Screw Gun Showdown series, let's take an in-depth look at Quik Drive's screw fastening systems - featuring some of their top-rated tools. Per Simpson Strong-Tie's website, Quik Drive is designed to perform optimally when used for the following applications: subflooring/sheathing, decks/docks, drywall, fiberglass-backed gypsum sheathing, fiber-cement siding, standing-seam metal roofing, exposed fastener metal roofing, tile roofing, steel framing, steel decking, underlayment, truck beds, crating, truss ply fastening, and ledgers on steel - among others. With Simpson screw fastening tools, the type of application you fasten determines the type of Quik Drive system you require.
    Quik Drive Apps
    Different from Senco's DuraSpin, which we will cover in the second part of this series, Quik Drive screw systems are customizable, composed of various components that are paired to tackle a specific set of applications. A traditional Quik Drive system consists of three main components - a motor, an extension (for applications that require bending or reaching), and an attachment (designed for a specific application). The motor is relatively universal, and is more or less based on user preference - Nail Gun Depot specializes in Makita-powered screw gun motors for Quik Drive. The extension arm is based on the type of application you are screwing into place, but is not necessarily required - for example, you might not use an extension for drywall installation, whereas you would for deck fabrication. The most unique piece to the puzzle, the attachment, determines what you will be fastening. Quik Drive attachments vary depending on the type of fastener an application requires - just think of each Quik Drive kit like pairing wine and cheese.
    Quik Drive System
    The Screw Gun Showdown features the following Quik Drive screw systems:
    Quik Drive Attachment
    Quik Drive also offers a limited-lifetime warranty on all of its QDPRO attachments - providing added peace of mind for contractors who need to get the most out of their tools.
    Quik Drive Drywall App
    Something else to keep in mind, though not included in the Screw Gun Showdown, Fein recently released a cordless motor that features a built-in Quik Drive adapter - so you can plug in any Quik Drive attachment on the go, no hassle.
    Fein Cordless Motor For Quik Drive
     
    Quik Drive PRO200
    Last, but not least, with any eligible Quik Drive system purchase via the Screw Gun Showdown - just use the promo code "SCREWGUN" - you will receive 5% off your purchase, a FREE QDDECKCLIP-RC Decking Nose Clip, and automatic entry to win a Quik Drive PRO200 Drywall Attachment at the promotion's end.
    Let the showdown begin!
    Home Of The Screw Gun Showdown,
    Nail Gun Depot
    Read More
  • Nail Gun Depot's Most Memorable Blog Posts Of 2014

    We're finally here - the end of 2014. A time to celebrate, reflect and look toward the future. What better way to capture the essence of 2014 at Nail Gun Depot, than to take a look at some of the Nail Gun Network's most influential blog posts of the year. Take a second to check out some of our most popular posts of 2014!
    BeA Upholstery Stapler
    NGD's Top Picks: Hall of "Frame"
    1. How To Install Hardwood Floors: Perfect for the first-timer or budding expert, get start-to-finish tips for installing hardwood flooring. Learn which tools work best for the job and what it takes to lay beautiful new floors.
    2. Choosing An Air Compressor For Pneumatic Tools: If you use a pneumatic (air-powered) tool, you must use an air compressor to make it operate - but do you have the right air compressor for your tool? Find out in this blog.
    3. NGD Construction & Manufacturing Tool Index: For the DIYer or casual woodworker, find out which tools power the fastening industry. From construction and remodeling to manufacturing - we've got you covered.
    4. American Made Fasteners - A Senco Tradition: Not many manufacturers can boast the phrase "Made In America." At Senco, these words represent more than 80% of the fasteners they produce. Learn more about what makes Senco unique.
    5. How To Build & Install Your Own Kitchen Cabinets: Getting the kitchen cabinets you dream about can be more cost effective than one might think. Find out what you need to know to get the job done right.
    STAFDA Logo
    Viewer's Choice: Most Popular
    1. What's The Difference Between Brad Nailers & Finish Nailers?: An age old question, get the answers you need on the Nail Gun Network.
    2. What's The Difference Between A Floor Nailer & Flooring Stapler?: Don't use the right tool for the wrong job. Discover which flooring tool is best for your application with Nail Gun Depot.
    3. What Type Of Nail Is Correct For My Application?: Get the inside scoop on which nail you need for your project. From framing to finishing, we've got an answer for everyone.
    4. The Nail Gun Buyer's Guide: Shopping for a nail gun? Maybe you aren't familiar with what's out there. Find out which nailer is the right one for you.
    5. How To Choose The Right Upholstery Stapler: If you work with upholstery, an upholstery stapler is a must-have tool in your arsenal. In this article, find out which features are best for different upholstery applications.
    Nail Gun Network Logo
    And with that, we conclude our last post of 2014. Don't worry, we're only taking a break from blogging for the next two weeks - making time to celebrate the holidays with friends and family. Look for an all-new Nail Gun Network post January 6, 2015!
    Wishing A Happy Holiday Season To All,
    The Team At Nail Gun Depot
    Read More
  • Nail Gun Depot's 2014 Holiday Gift Guide

    We've finished up the Thanksgiving turkey - and tied a bow on Black Friday, so now what? Summer might be the most popular season for tools and fasteners, but let's not forget the best time of year to surprise a spouse, friend or family member with a new tool they are certain to love. For many craftsmen and woodworking hobbyists, the holiday season brings new life to their workshop.
    NGD Holiday Gift Guide
    Under $100
    • Senco PC1195: Designed for use with bulk nails, this compact palm nailer is 50% lighter than most of its competitors. The PC1195 features a magnetic nose for accurate nail placement, and compact design for easy storage. Excellent for driving nails in very tight places, this palm nailer is intended for use with specific applications such as joist hangers, framing, hurricane straps, fencing, decking and more. Available now on NGD for only $49.00.
    • Bostitch BTFP71875: A revolutionary new design from Bostitch, this hybrid tool is designed to be used as either a pneumatic brad nailer or heavy-duty stapler. A dual trigger design provides added safety and comfort. The BTFP71875 pneumatic hammer stapler also features oil-free operation, a bottom-loading magazine, and a built-in reload indicator. Available on NGD for only $55.00.
    • Hitachi NP35A: If you are shopping on a budget, but still want a brand-name tool, look no further than the Hitachi NP35A 23 gauge pin nailer. In addition to a five-year warranty, the NP35A comes with a rugged plastic carrying case, safety glasses, 1/4" NPT male plug, no mar tip (x2) and hex bar wrench. This Hitachi pin nailer features an auto-adjust magazine to easily switch between different fastener lengths, a dual trigger safety, rear exhaust, adjustable depth of drive, reload indicator and removable nose plate. This handy tool is perfect for rattan furniture production, light wood assembly, finish and trim work, decorative trim, window beading, craft work and more. Available on NGD for $99.00.
    Senco PC1195
    $100 to $250
    • Senco PC1010: At 20 lbs, the Senco PC1010 oil-less air compressor features an extremely lightweight and ultra quiet design. This hand-carry compressor also features an electric, direct drive motor for increased efficiency - as well as an aluminum cylinder, oil-less pump, 1/4" coupler and cushioned hand grip. The PC1010 is great for finish and trim work, upholstery, hobbies and crafts. Available on NGD for $119.00.
    • Bostitch BTFP72646: Perfect for anyone who loves finish and trim woodworking, the Bostitch BTFP72646 3-tool finish & trim combo kit with air compressor is designed with the DIY'er and amateur woodworker in mind. Get a complete set of pneumatic finish tools at one great price. The Stanley Bostitch BTFP72646 kit includes: The SB-1664FN - 16 ga. straight finish nailer, SB-1850BN - 18 ga. brad nailer, BTFP71875 - heavy-duty 3/8" crown stapler, BTFP02011 - 6 gallon oil-free air compressor, 1/4" x 25' heavy-duty airline with fittings and sample fasteners. The BTFP72646 combo kit is ideal for interior trim, crown molding, baseboards, shoe molding, staircases, cabinetry, paneling, housewrap, screening, upholstery, dust containment, insulation and felt paper. Get the entire kit on NGD for $249.00.
    • Senco WC150XP: This rugged, wide-crown Senco stapler features a new firing valve design for fast and powerful operation, tool-free locking adjustable depth of drive for consistent driving, rotating belt hook, EZ clear latch for fast jam removal, high-strength magazine, and extremely durable exhaust cap for superior damage resistance. This construction stapler even comes with a five-year warranty! The WC150XP wide crown stapler is excellent for attaching corrugated to skids, furniture and cabinet frames, foam insulation and butt joints. Available on NGD for $249.00.
    Bostitch Finish & Trim Compressor Kit
    $250 & Over
    • Paslode CF325-Li (replaced by Paslode CF325XP - 905600): No hose or compressor required for this cordless framing nailer. The CF325-Li even includes a five-year manufacturer's warranty - and comes complete with rugged plastic carrying case, rechargeable lithium ion battery and charger, safety glasses, owner's manual and 5/32" hex wrench. Shoots both Paslode clipped head and Roundrive nails. This cordless framing nailer features new lithium ion technology for improved battery life and charge times. Additional features include the Quiklode fuel cell design for easy installation, new on/off battery position for added convenience, internal steel rings for longer tool life, heavy-duty utility hook, full body rubber grip, and nail lockout to prevent dry firing. The Paslode CF325Li cordless framing nailer is excellent for framing, wall sheathing, roof sheathing, floor decking and more. New price of $355.00 on NGD.
    • Senco DuraSpin Combo Kit: The Senco DuraSpin DS215-18V cordless collated screw gun promo kit, comes complete with (2) 18V Li-Ion batteries, charger, 2 drive bits, drywall and wood nosepiece, and soft storage bag. Features include tool-free adjustable nose piece for different length screws, quick-bit release, high-speed 5,000 RPM motor, patented corner fit feed system for easy wall and corner access, adjustable depth of drive with depth lock, variable speed trigger with lock and reverse, belt hook, and comfortable rubber hand grip to maximize comfort. This Senco DuraSpin cordless screw gun is excellent for drywall, subfloor, cement board, underlayment, sheathing to steel, metal framing, steel decking and rigid foam insulation. Also included, get a FREE 18V cut-out saw with the purchase of this DS215-18V DuraSpin promo kit - while supplies last. DuraSpin promo kits available on NGD for $259.00.
    • Powernail 2000 (replaced by Powernail 2000F): The Powernail 2000 is the industry's first air-powered, trigger-operated 20 gauge flooring nailer - designed to install tongue and groove engineered flooring from 5/16" to 9/16" in thickness. This Powernail cleat nailer offers consistent depth control, while ensuring precise angle and fastener placement. Its 20 gauge cleats are designed to minimize split out - even on the thinnest of floors. Available on NGD for only $285.00.
    • Senco Fusion F-16A: The perfect balance of user-friendliness and convenience, Senco's Fusion finish nailers are a hot-buy for the holidays. The F-16A, for example, comes complete with soft-sided carrying case, 18V Li-Ion battery and charger. Features include an adjustable belt hook, nose mounted LED light, selectable drive for sequential or bump fire operation, rugged aluminum magazine and drive cylinder, adjustable depth of drive, and patented reflex shot design for instant firing. Senco's Fusion cordless nailers boast the power of an air nailer with the convenience of cordless operation. The F-16A is ideal for finishing applications in construction, furniture and cabinet frames, molding, baseboards, and upholstery trim panels. Your choice of Senco Fusion nailer for only $349.00 on NGD.
    Senco DuraSpin Combo Kit
    Whether you are looking for an inexpensive stocking stuffer or a gift they'll never forget, Nail Gun Depot has something for every price-point. And don't forget, tools ship free with standard shipping. Order early and save big.
     
    Here's To Nailing Your Holiday Wish List,
    The Team At Nail Gun Depot
    Read More
  • Visiting The 2014 STAFDA Show

    You were probably surprised to see there wasn't a new NGD blog post yesterday. Well, we're making up for it today, now that we're back from STAFDA.
    STAFDA 2014
    To summarize the entire 2014 STAFDA show, we would have to write a book. With several hundred exhibitors - and many more attendees - STAFDA is a mecca for the tool and fastener industry. Every year, the Specialty Tools & Fasteners Distributors Association (STAFDA) puts on the event, hosting the convention in various cities across the U.S.
    STAFDA 2014
    This year, STAFDA visited Charlotte, NC. Home to the NASCAR Hall of Fame and other attractions, here's a brief overview of NGD's trip to North Carolina.
    Charlotte, NC
    As tool and fastener technology continues to grow, STAFDA is a great place to catch a glimpse of the latest and greatest within the industry. Among highlights of the show, we caught a close-up glance at the Bostitch Smart Point nailers - as well as their all-new cordless carton closing staplers. We also saw QuikDrive's new cordless motor (powered by Fein), capable for use with all QuikDrive attachments. Stinger featured all of their cap fastening tools - and we saw an up close demonstration of the stand-up CAMO hidden-deck fastening tool.
    CAMO EdgePro
    From Senco, STAFDA served as the launching point for two new tools, the RoofPro 445XP and the SCN63LDXP structural foam insulation nailer. MAX displayed their completely refreshed CN565S2 coil siding nailer - and Jaaco featured their ballistic pin tool (designed for fastening foam board to wood, steel and concrete - with available nosepiece attachments for washers).
    Pneu Tools
    Pneu Tools also debuted their new concept, a camouflage tool color scheme - pictured above. And we visited our friends at Cadex to check out their rock-solid line of finish and trim tools - including the CB18.50A (replaced by Cadex V2/18.50).
    BeA Rolling Tool
    We also got the chance to view and demo some new and exciting product lines - including products that are still in the concept phase. For 2015, look for new tools from Grex, Fasco, BeA, Everwin, Omer and many of your other favorite brands. Look for expanded product offerings on NGD as well - with new attachments, compressors and accessories coming to the site. For those interested in automated fastening solutions, we have something special in the works as well.
    Your Tool & Fastener Experts,
    The Team At Nail Gun Depot
    Read More
  • How To Build & Install Your Own Kitchen Cabinets

    Chilly temperatures and shorter periods of daylight mean one thing - winter is near. With Halloween less than a week away, it's time to start thinking about the indoor projects you've been putting off all summer. If you're looking to renovate your kitchen, consider building and/or installing your own kitchen cabinets - a project that can save thousands of dollars if done correctly.
    OMER Cabinet Trim
    Before you start, make sure you are up for the challenge. If you've never tackled a project like this before, you might want to purchase pre-built cabinets and jump straight to installation. If you decide to start from scratch, keep in mind this project will take a good amount of time and dedication to complete - especially for larger kitchens. However, for the master woodworker, the end result could be well worth the time - just make sure you have a helper or two for lifting and mounting.
    Building Your Cabinets
    If you are starting from scratch, make sure you have the proper materials. Traditionally, cabinets are about 24" deep and 34.5" tall - with a 25" deep counter top - which adds up to an overall height of 3 feet. To calculate the placement for upper cabinets, add 18" to 20" to the counter height. Subtract the difference from your overall ceiling height to determine the size range available for your upper cabinets. Keep in mind, regular wall cabinet depth is 12" to 14". Lower cabinet width can range from 12" to 60" - divided down in 3" increments. Make sure you also account for door size when planning the size of your cabinets.
    Next, you will need to cut your materials for assembly. For the sides, appearance really doesn't matter (unless it's an edge cabinet) - as long as your material is sturdy enough to support the cabinet, counter and all of the contents inside your cabinet. You might find that 3/4" plywood or manufactured board works well. Once the sides have been cut to proper dimensions, clamp your two sides together and use a saw to cut out a toe-kick (notch) where the base of your floor cabinets will be. For upper cabinets, you will not need a toe-kick. To finish up prepping material, cut the bottom panel, the face panels, as well as two base panels and two top braces - base panels and top braces not needed for wall cabinets.
    Moving to assembly, you will want to put together the base first. Make sure you have a high-quality wood glue and power drill or screw gun available for this step, as you will attach your base panels to the bottom panel. Make sure to allow the proper amount of space for your toe-kick before gluing together. Drive screws into the base panels to confirm a secure fit. Add your side panels, secure the top braces, and nail the back on using a finish nailer. Use braces or corner brackets to secure the unit and reinforce its integrity. Install shelves and face panels before attaching your cabinets to the wall.
    Depending on the thickness of board you are working with, Bostitch is now offering its all-new Smart Point line of finish nailers. Smart Point finish nailers feature a unique nose that increases the capability of these tools - while decreasing the amount of damage caused to a surface during firing.
    Bostitch Smart Point
    Installing Your Cabinets
    For time conscious DIYer's and renovators that skipped the previous steps and purchased pre-built cabinets from the store, it's now time to install your new kitchen cabinets. Installation is relatively easy - especially for floor cabinets. Simply fit your cabinets where they are intended to be installed, and drive screws through the back panel into studs in the wall. For wall cabinets - where additional support is imperative - you will also need to secure "L" brackets into studs in the wall, to help support these hanging cabinets at their base.
    To drive screws quickly and effectively, we recommend a Senco DuraSpin Screw Gun. With several different fasteners to choose from, the new Senco DuraSpin comes highly recommended by many of the Pro's.
    Senco DuraSpin
    Fit your door panels and fasten - assuming they haven't been installed yet. Depending on the type of kitchen cabinet you are building or installing, you will also have to install your counter, sink, decorative trim or any additional accessories not mentioned.
    Be sure to pay careful attention to manufacturer specs on any material or pre-manufactured goods. Always follow manufacturer assembly, installation and safety requirements. Keep in mind that this is an overview of tips and tricks for kitchen cabinet assembly and installation. Every kitchen is different, and might require additional steps or measurements be taken.
    Here's To Nailing Your Next Cabinet Installation,
    The Team At Nail Gun Depot
    Read More
  • New Tools On Nail Gun Depot

    Want to stay updated on what's new in the tool and fastener industry? As part of our commitment to providing the latest and greatest in power fastening tools, Nail Gun Depot is excited to announce the following recently launched tools, now on NGD.
    Fein ASCS6.3
    Let's start with an innovative - the first of its kind - cordless screw gun motor for QuikDrive, powered by Fein. The Fein ASCS6.3 cordless motor for QuikDrive auto-feed screw fastening systems is compatible with ALL QuikDrive auto-feed attachments, thanks to a pre-installed QuikDrive adapter - bringing a whole new level of compatibility to the QuikDrive family of screw guns. An 18V Li-Ion battery powers the system, eliminating the need for power cords and electrical outlets on the job site. Drive more than 600, 3" deck screws per battery charge. A high-output, brushless EC motor runs up to 266 in/lb-feet, featuring an efficient and maintenance-free design. To top this package off, the Fein ASCS6.3 includes a three-year warranty on the motor and batteries, when registering your tool online.
    QuikDrive PRO300S
    Another addition to the QuikDrive line up, be sure to check out the QuikDrive PRO300M25K wood decking kit. Just in time to finish up your deck building project before the winter, the PRO300M25K drives special 1-1/2" to 3" collated Deck-Drive screws into wood deck surfaces. The PRO300SM25K kit includes the QuikDrive PRO300S auto-feed decking attachment, an extension for stand up driving, a decking nose clip for consistent screw placement, a quiver for keeping screws at your fingertips, rugged tool case, and Makita screw driver motor. Item includes a manufacturer's lifetime warranty.
    Senco SCN63LDXP
    Moving to a tool for specialized use, Senco has launched the SCN63LDXP structural foam insulation nailer, capable of driving 15 degree, 2-3/8" to 2-1/2" wire coil framing nails. Designed specifically for the installation of continuous structural foam insulation panels, the SCN63LDXP Coil Nailer drives nails through up to 1" thick foam insulation panels. The Senco SCN63LDXP features a long drive lock out, ensuring the proper seating of a nail head - through the foam - against the substrate. The unique safety foot guide ensures proper alignment and reduces damage to the foam surface when fasteners are driven. The SCN63LDXP fastening system reduces installation time and improves productivity on the job site or for in-plant operations. Additional features on this tool include 360 degree adjustable exhaust, tool-free depth of drive adjustment, comfort grip, adjustable nail canister, e-z load design, debris shield and a five-year limited warranty from Senco. Please note this tool is to ONLY be used to install continuous foam insulation with a foam thickness of up to 1" deep - NEVER use on bare wood, metal or other hard surfaces. The drive blade will extend beyond the safety element in the actuated position. This tool is rated for Atlas ThermalStar LCi-SS insulation.
    Free Paslode Car Charger
    Last, but certainly not least, be sure to check out our Paslode Halloween Spooktacular, where you get a free car charger adapter on qualifying Paslode cordless finish and trim tools.
    Your Source For Nailer News,
    The Team At Nail Gun Depot
    Read More
  • Nail Gun Depot's Construction & Manufacturing Tool Index

    Shopping for a particular tool or fastener? Need to find what you're looking for quickly? You've come to the right spot. Welcome to Nail Gun Depot's construction and manufacturing industry index for tools! This week, let's take a look at some of the larger industries we serve - giving you a fast pass to the tools and fasteners you need.
    Framing Nailer
    General Construction:
    Framing: Need a nailer for framing or sheathing? Choose from a selection of paper strip, wire strip, plastic strip, wire coil and Roundrive framing nailers and nails.
    Drywall: Do you drywall frequently? Get the best in auto-feed screw guns for drywall and more. Battery-powered and electric variations available.
    Decking: Collated and single drive deck screw guns available from CAMO, Senco, QuikDrive and others.
    Floor Installation: Choose between hardwood nailers, flooring staplers and carpet staplers for flooring installation. You can even find specialty attachments for some of your favorite flooring tools.
    Roofing: From roofing nailers to hammer tackers, we've got the roofing tools you need. Don't forget to check out our selection of cap button staplers for roofing felt and housewrap!
    Siding: Similar to a roofing nailer or coil framing nailer, a siding (or fencing) nailer is ideal for fence board, siding, decking and other structural applications.
    Sheathing & Insulation: We offer a wide variety of medium crown staplers and wide crown staplers to choose from, for sheathing and more.
    Concrete | Steel Nailing: Choose from a wide variety of concrete | steel T-Nailers and pinners. Now available, Nail Gun Depot has recently expanded its selection of fastening tools for foam board to concrete and steel applications.
    Rebar Tying: For heavy-duty concrete fastening, rebar tiers are perfect for pre-cast concrete products, building foundations, road & bridge construction, floors & walls, retaining walls and swimming pool walls.
    Senco Fusion Finish Nailer
    Renovation and Remodeling:
    Finish & Trim: Need a finish, brad or pin nailer for molding, furniture assembly or light woodworking? We have more than 60 models to choose from. And don't worry if you prefer a finish stapler, we have over 30 fine wire staplers and narrow crown staplers to choose from too.
    Upholstering & Fabric Fastening: Choose from a variety of electric and pneumatic upholstery staplers at Nail Gun Depot. For hard to reach areas, a selection of long nose upholstery staplers are also available!
     
    Bostitch Cordless Carton Closer
    Manufacturing:
    Pallet & Crate Assembly: Another member of the framing nailer family, pallet and crating nailers are designed specifically for the assembly and repair of pallets and crates. These nailers are also commonly used in manufacturing or high-volume production environments.
    Packaging: Managing a shipping facility of fulfillment center? Save time, energy and expense with packaging tools such as top carton closers (also known as carton closing staplers), plier staplers and more. Choose between cordless, pneumatic and manual box closing tools.
    Bedding: For box spring and a mattress assembly, a bedding stapler is an absolute must-have tool. These tools are designed for spring to frame fastening.
    Corrugated: A hybrid design in fastening, corrugated fastening tools work great for butt joints in cabinet and furniture frames, truss construction, picture frames, wood boxes, pallets and pallet repair.
    Bag Closing & Automotive Upholstery: For mass assembly, including automotive upholstery and bag closing applications, hog ring pliers (also known as C-ring tools) are designed to clamp a variety of fabric and metal materials together. These tools are perfect for tagging.
    Specialty: From tube closing clinch staplers to bar code and label staplers, Nail Gun Depot is continually expanding its selection of specialty tools from fabricators and niche manufacturers.
     
    Your Fastening Tool Experts,
    The Team At Nail Gun Depot
    Read More
  • New On Nail Gun Depot - Tools

    Every now and then, we like to talk about some of the new and exciting tools we've added to our collection, here at Nail Gun Depot. As we wrap up the summer and prepare for fall, let's look at some of our most recent additions to Nail Gun Depot.
    Let's start with a tool for industrial applications, BeA's Bar Code and Label Stapling tool, designed specifically for lumber tagging applications. The BeA 380/10-400 is a 20 gauge bar code & label stapler that is designed for use with 3/8" x 1/2" crown BeA 80 Series fine wire staples. Intended for lumber tagging, this tool is excellent for lumber yards and distribution centers. With a heritage of producing tools for industrial manufacturing, BeA offers a comprehensive selection of manual and automated stapling, corrugated and hog ring tools. The BeA 380/10-400 makes bar code stapling easy, featuring one-handed operation and a compact, full-metal design. This tool applies a label and staple at the same time for fast, efficient use.
    BeA Bar Code Tagging Stapler
    For the DIY'er, renovator or woodworker, check out the Cadex CB18.50A, 18 gauge brad nailer (replaced by Cadex V2/18.50 18 gauge brad nailer). New to Nail Gun Depot, this brad nailer is engineered for smooth, quiet, compact operation. This tool features a unique built-in air blower that can be used to clear dust and debris from an application area. Other features on the CB18.50A include combination trigger for single and bump fire, large magazine window, quick release nose for jam clearing, side-load magazine, adjustable depth, comfort grip handle, rear exhaust, 360 degree movable coupler, no-mar tip, anti-dry fire mechanism, and a carrying case. The Cadex CB18.50A is perfect for furniture, door and window, beading, cabinet and drawer assembly, boat construction, skirting board fixing, wire covers, matchboarding, shoemaking, panel and frame assembly, trim panels and decorative trim.
    Cadex CB18.50A
    Another specialty tool worth looking at, the Jaaco NPCN-7312 wire coil concrete and steel ballistic pin nailer is designed for securing foam/insulation board to steel, concrete or block. This NailPro tool from Jaaco drives 15 degree 1-1/4" to 3-1/2" ballistic pins with optional washers and attachments available. Additional applications for the Jaaco NPCN-7312 include stucco into steel (washer curves to avoid damaging the surface), with knurled pins featuring surface etching to allow for steel penetration and a ballistic or rounded point for entry. Click here to see a tool demonstration.
    Jaaco NPCN-7312
    New technology with an even newer deal, Senco is now offering the DS215-18V DuraSpin cordless screw gun with a FREE 18V cut-out saw, when you purchase a DS215-18V DuraSpin Promo Kit. A limited-quantity deal from Senco, get the best in cordless screw guns with Senco's DS-215 DuraSpin, which is capable of driving up to 2" collated screws with 5,000 RPM's of power. Users agree that this tool is perfect for drywall installation, subflooring, cement board, underlayment, sheathing to steel, metal framing, steel decking and rigid foam insulation. Take advantage now, while supplies last.
     
    Senco DS215-18V DuraSpin Promo Kit
    Another game changer in the screw gun industry, CAMO tools is now offering its Edge Pro hidden fastening system for decks. With just enough time to rehab your deck before winter, the CAMO Edge Pro allows you to seamlessly install a wide variety of wood, composite or PVC 1" to 1-1/2" deckboards, driving each deck screw at a 45 degree angle into the edge of the deckboard - to provide a fastener-free decking surface. Previously available for use with individual screws only, the Edge Pro is designed to drive CAMO 2-3/8" ProTech coated, collated carbon-steel deck screws. Secondary spacers can also be used for additional gap options.
     
    CAMO Edge Pro System
     
     
    Getting You The Latest & Greatest In Power Fastening Tools,
    The Team At Nail Gun Depot
    Read More
  • Which Woodworking Tool Do I Need For My Project?

    Getting ready to start a woodworking project? Maybe you aren't sure what tool(s) you need to complete your project? Let's take a look at some of the tools you might need to tackle woodworking - whether you are starting your first project or adding a new tool to your collection.
     
    Bostitch Finish Nailer
    There isn't one specific woodworking tool that is more important than another for your workshop - it really just depends on the project you are looking to take on. Unless you get a battery-powered, cordless fastening tool, you will need an air compressor to power any nail gun or staple gun you purchase. If you get a screw gun, such as Senco DuraSpin, you can choose between battery or electric power - in other words, no need for an air compressor.
     
    Bostitch Compressor
    If you are just getting into woodworking or DIY projects around the home, you will probably want to start with a finish, brad or pin nailer, as these tools are most commonly selected for smaller woodworking projects such as furniture and cabinet building, trim work and craft projects.
     
    OMER 12.40
    Looking for something a bit larger to build? For sheds, home additions, tree houses - or anything else that requires a structural frame - you will need a framing nailer. These nail guns have the power to drive large framing nails, which are minimum-mandatory for any structural project. Once a structure has been framed, you might find a screw gun useful for adding any finishing touches to your project, such as drywall, deck boards, subfloor and more.
     
    Similar to a finish nailer, you might also consider a finish stapler - depending on the small project you are working on. Staple guns can be particularly useful for furniture and upholstery projects. Upholstery staplers are an absolute must-have tool if you are considering refinishing a chair or sofa.
     
    Duo-Fast Furniture
    Last, but not least, don't rule out a palm nailer as a viable option for less intense projects - particularly ones that require touch-up with hard to reach areas. A palm nailer is typically used for framing, decking, fencing, pole barns, metal connector straps and other similar applications. While palm nail guns don't offer the benefit of a collated drive to hold a large capacity of fasteners, palm nailers are small, and capable of reaching hard to access areas - where a large tool would not be able to fit. Another benefit to palm nailers, you can find most priced below $100.
     
    Senco Palm Nailer
    Ready to start your project? Need more help? Our trained customer service team is ready to pair you with the perfect fastening tool for your project.
     
    Your Woodworking Experts,
    The Team At Nail Gun Depot
    Read More
  • The Senco DuraSpin Screw Gun & Fastener Buyer's Guide

    If you are working with drywall, building a deck, or installing subfloor, chances are you will be using a screw gun or collated screw fastening system. While there are more than a handful of options available to consumers, a rising star in the segment, you should consider the Senco DuraSpin lineup of collated screw fastening tools. With a recently refreshed product line (within the last year or so), Senco's DuraSpin tools are ready to stand up to the projects your throw at them.
     
    Available in both electric (corded) and battery (cordless) variations, Senco DuraSpin screw systems are adaptable, based on the needs of their user. While an electric model, such as the DS332-AC, will guarantee use wherever an outlet is available, cordless DuraSpin models, such as the DS312-18V, let a user go beyond the length of a cord - we just recommend keeping a spare battery on hand for large-scale projects.
     
    Maybe you would rather have an attachment that can be used with a power screw driver? Senco's DuraSpin has a solution for that too, with one of their auto-feed attachments. Available as an attachment (DS320) or as a full kit with power screw driver included (DS440-AC), there are a variety of options available to suit different degrees of demand.
     
    When we start talking about features, DuraSpin doesn't fall short of the mark either. One of our favorites, look for Senco's patented corner-fit feed system - which allows you to maneuver the screw gun in hard to reach corners and narrow spaces that a typical screw system would not be able to fit. If you choose to get the DS440-AC or one of the auto-feed attachments offered by Senco, look for an adjustable arm that permits a user to stand during labor intensive projects, which would otherwise require them to bend over or kneel.
     
    Now that we know more about the DuraSpin tools, what about the screws? Nail Gun Depot offers more than 80 variations of DuraSpin screw, designed for drywall, wood and metal - for both interior and exterior applications. Available in a plethora of shapes, sizes, material - and even color - there is a DuraSpin screw that will meet the needs of your project application.
     
     
    Need an accessory? DuraSpin collated screw fastening tools have a selection of replacement bits, attachments, washers and other parts that can be acquired individually - to deck out your decking tool. You can check out a variety of available DuraSpin bits here.
     
    Giving You The Tools To Get The Job Done Right,
    The Team At Nail Gun Depot
    Read More
  • Items 21 to 30 of 40 total

Copyright © 2017 Nail Gun Depot All rights reserved. All trademarks and brands are property of their respective owner