CALL CART ACCOUNT

ITEMS IN CART: 0

$0.00

translate
Projects & Applications
Projects & Applications
  • How To Install Hardwood Floors

    With the housing market slowly taking a positive turn, many consumers are beginning to once again buy and sell houses. At the same time, many house hunters are looking for homes they can rehab - giving them a chance to put their personal style into the home they will live. A popular trend in rehab and renovation, and one of the first things many home-buyers will add to their home if it's not already there, installing hardwood floors can enhance your home's appearance - and even add value. Learn how to install hardwood floors, on the blog by Nail Gun Depot.
     
    Your first step in hardwood floor installation is determining the type of wood you want to use, including species, board width and thickness. The finish and color of your hardwood flooring will play a major role in the overall appearance of a room, so make sure you choose flooring that matches your furniture, cabinets, counters and wall color. Know the measurements of the space you will be installing a new floor, to get the most accurate pricing and quantity of materials needed. Thicker wood is typically more expensive, but can add strength to your floor system. If you are working with a tight budget though, you will most likely want to use a thinner cut of wood.
     
     
    When measuring a room for flooring installation, measure the width and length, then multiply for square footage. Order 10-15% extra material to allow for mistakes and irregular board lengths - such as when lining floor boards up to a wall.
     
    Before you even begin to install your hardwood floor, inspect the sub-floor to make sure it is sturdy and free of squeaks. At a minimum, sub-flooring needs to be 3/4" thick. If there is a squeak, drive a long drywall screw into the sub-floor at the joist where the squeak happens. Be sure the sub-floor is clean and free of any debris.
     
     
    Next, you will want to put down a layer of vapor barrier paper. This paper helps to prevent moisture from forming underneath your hardwood, which can eventually lead to cupping or mold if left untreated. You'll want to use 15 pound tar paper or felt, allowing at least 4" of overlap between sheets. Secure the barrier by stapling - and be sure to pencil a line on the baseboards to show where joists are located. You are now ready to begin your installation.
     
    Start installation with the longest wall, and work your way across the room. Remove the shoe molding from the wall and create a chalk line 3/8" from the baseboard, to allow for expansion and contraction due to humidity and climate change. Begin with a long board for the first row. Line up the board's edge to the chalk line and drill pilot holes through the board into the sub-floor and joist. You will want to face nail each board at every joist, using a nail-set. Repeat this for the whole first row of boards - choosing board length at random to stagger the boards. A trick of the trade, lay all of your boards out prior to nailing, to get an idea of length and ensure the boards do not line up uniformly. Lay the floor boards perpendicular to the joists below. This will help to anchor the floor and will add to its sturdiness and integrity. A simple trick to help you determine direction, look at your sub-floor and see which direction the nails run along the joists.
     
     
    Once you have installed a few rows of boards, drill additional pilot holes into each board's tongue, and hand-nail the rolls. Once you have enough clearance, begin using a pneumatic floor nailer, such as the Bostitch Miiifn or the Senco SHF200. You can also use a manual floor nailer, such as the Bostitch MFN201, depending on preference. Keep in mind a pneumatic nailer will probably cost a little more than its manual counterpart, but the ease of use and time that a pneumatic tool saves will justify its use in most cases. You will also need to decide whether to use a flooring nailer versus a flooring stapler. Be sure to research the proper length of a nail or staple for the tool you are using - and the board it is fastening.
     
     
    Position the lip of your pneumatic floor nailer over a board's edge and strike firmly, using a flooring mallet. This will drive the nail into the tongue of the board. The industry standard, drive at least two nails per board - placing them roughly 10" apart. For tongue and groove flooring, make sure each end fits into the corresponding end of the next board. If this is not completed properly, your floor will be left with fairly large gaps. When you approach the opposite wall from where you began the flooring installation, you will again return to drilling pilot holes and using a nail-set, as the pneumatic nail gun will not fit properly.
     
    Once the last board is secured and in place, clean the newly installed hardwood flooring with a damp cloth, using only a water and/or vinegar solution. Finished hardwood is very durable, but can easily be damaged by exposure to dense moisture, direct sunlight, heavy items being dropped, or items scratching across its surface. If you take good care of your hardwood floors, they can last a lifetime.
     
    Good Luck On Your Next Flooring Project,
    The Team At Nail Gun Depot
    Read More
  • Specialty Fastening Tools You Need To Know About

    We talk a lot about the mainstream fastening tools that most of our customers can relate to their job site, but what about the specialty tools that go beyond a traditional finish nailer or flooring stapler? That's right, we're talking about the big-guns. These tools are not available at your big box stores. They are custom built - designed with the capability to function above and beyond the norm. Sometimes, it takes a little bit more to get the job done right. Now is your chance to discover some of these tools that can make your job easier - tools that you can't just find anywhere.
     
    Let's start with one of our favorite specialty fabricators, Motion Devices, a company that takes Senco brand tools and gives them a unique twist in function. A new addition to the Nail Gun Depot site, the Senco MD0054 is a prime example of tool fabrication that provides added value to the user. To the ordinary eye, this tool would appear to be a Senco FP42, however, upon further examination, not only can this tool be used as a finish nailer, but can also act as a floor nailer via a removable attachment. In combining the function of multiple tools, the MD0054 will ultimately save a floor installer or general contractor on the amount of tools they need.
     
    Senco MD0054
     
    Another great example, the MD4913 utilizes the popular Senco SNS200XP, converting it into a medium crown tube closing clinch stapler. The Senco MD4913 tube closing clinch stapler is designed to secure plastic and metal end caps on mailing and shipping tubes. Likewise, the MW4941 Wide Crown Clinch Stapler is ideal for softwood and corrugated cardboard applications. Enhancements to this tool include a new remote firing valve for fast and powerful operation, a high-strength compostive magazine, and an extremely durable exhaust cap to prevent damage.
     
    Senco MW4941
     
    A powerful option in the corrugated fastening segment, the BeA W-Type Corrugated Fastener Tool (12000133) virtually eliminates the need for gluing, milling, clamping, screwing and other time-consuming operations. Designed with durability in mind, a corrugated fastener is twice as strong as a regular fastener - meaning this tool is a must have item for anyone that regularly works with corrugated products, such as cardboard. This BeA tool also features a compact design which gives it the agility to seal butt and corner joints with ease.
     
    BeA 12000133
     
    Last, but certainly not least, we couldn't leave the topic of specialty tools without mentioning carton closing staplers. An absolute must have tool for any business that deals in production and distribution, top closing staplers maximize productivity and provide a durable seal required for shipping. Looking for an outstanding example? The Josef Kihlberg A560PN heavy-duty carton stapler is designed to tackle high and low volume closing of corrugated cardboard including box folding, complete overlap and more. Check out our selection of carton closing staplers here.
     
    Josef Kihlberg A560PN
     
    Whether you prefer a fabricated fastening tool or a specialty tool designed to perform a specific job, we've got you covered. Nail Gun Depot offers one of the largest selections of specialty fastening tools - tools that you can't find everywhere - and the technical support to maximize their potential.
     
    Your Go-To Source For Specialty Applications,
    The Team At Nail Gun Depot
    Read More
  • What's A Framing Nailer?

    Framing nailers are designed to tackle the obvious - framing - but did you know they can be useful for other applications? Uses can include anything from framing to sheathing, sub-flooring, truss building and decks. If you work in a construction or renovation trade, chances are you have worked with a framing nailer at least once. Let's take a look at how a framing nail gun works, its uses, and different options available on the market today.
     
    Paslode CF325Li
     
    One of the most important woodworking tools on a home-building site, the framing gun will allow you to drive framing nails into support structures without hesitation. These nail guns are designed for heavy-duty use - and can drive a row of fasteners faster than many woodworkers can hammer one framing nail. As with any tool, framing nailer safety is one of the most important practices you should follow. For more information on nail gun safety, check out our previous blog post here.
     
    If you are researching different framing nailers, you will find that there are two primary types available - cordless or pneumatic. Cordless framing nailers are powered by a compressed-air fuel cell, paired with a rechargeable battery, such as the Paslode CF325Li (replaced by Paslode CF325XP). The older, more traditional sibling, a pneumatic framing nail gun (also known as air-powered), generates its energy through an air compressor, such as the Senco FramePro 325XP. Either of these tool variations are perfect for the job site. A cordless framing gun will typically cost more than its pneumatic counterpart, however, you will find that it is much more flexible to use, as it isn't restricted to the length of an air hose. Consider how versatile you need your nailer to be when shopping for a new one.
     
    Senco FramePro 325XP
     
    A typical framing nailer will be available with either a bump-fire or single-shot mechanism, which will allow you to select between how you trigger a nail to be driven. Bump-firing allows you to suppress the nailer's trigger and continuously drive nails as the gun moves across a section of wood. Single-firing, on the other hand, requires you pull the trigger each time you fire a nail. As a safety precaution, almost every new nail gun will require that the nose be pressed against a surface, in order to fire a nail.
     
    Hitachi NV83A4
     
    The magazine is another area of consideration, when shopping for a framing gun. Depending on your line of work, you will want to consider the benefit of a strip nailer versus a coil nailer. Typically, construction workers and builders who work in high-volume fastening environments prefer the coil nailer, such as the Hitachi NV83A4, as it allows for a larger magazine capacity - which increases productivity. A DIYer or light-use builder might prefer the strip nailer, such as the MAX SN883RH2 (replaced by MAX SN883RH3), as it is lighter weight, easier to load, and generally a bit more versatile. The biggest consideration between a strip or coil nail gun is magazine capacity - just be certain you are purchasing the correct nail for your gun.
     
    MAX SN883RH2
     
    If you need some help identifying the right nail for your nailer, use our Fastener Finder tool on Nail Gun Depot.
     
    Helping You "Nail" Your Next Fastening Tool Purchase,
    The Team At Nail Gun Depot
    Read More
  • How To Upholster A Chair

    Is your furniture starting to look dated? Maybe you have pets or small children that have torn up the upholstery on your furniture - especially in high-traffic areas, such as the dining room. New furniture can be costly, so why not refresh what you already have? In a few simple steps - and a weekend dedicated to this project - you can have a beautiful new dining room set that completely upgrades the appearance of your room, without spending a significant amount of money.
     
    First, you have to pick out the material and design of your new upholstery. This is strictly based on personal preference, though a durable material, such as cotton or a cotton-blend, might be better suited for a piece of furniture that receives a lot of use. Linen on the other hand is one of the worst fabrics for wear, which is why it is typically used on formal furniture that does not receive heavy use.
     
    Next, unscrew the seat of the chair from the base. Once separated, you can either remove the existing fabric from the padding, or can wrap the existing seat cover with your new one. It is easiest to just add a new layer of fabric over the old one - unless the old pad or fabric has an odor, or padding has escaped the cushion. Re-covering a bare pad is trickier, and could require additional work.
     
    Measure the length, width and depth of the seating pad and multiply three times the amount of any given dimension to calculate the amount of fabric you will need for your surface - this rule applies to a single surface, calculate for each chair separately. Also, be sure to measure from the longest point if working with a curved or angled shape.
     
    Similar to wrapping a present, lay the fabric facing wrong-side up on a level surface and place your chair cushion upside down on top of the fabric. Remember to align any patterns in the fabric with your seat, to ensure a clean appearance. Make sure you have enough fabric to wrap around all of the cushion's edges and fold under. Now you are ready to trim the fabric accordingly.
     
    The next step is where your upholstery stapler will come into play. Take the upholstery staple gun, such as the Fasco-Maestri 7C-16 electric stapler, and start stapling the folded over fabric - from the center outward toward the edges. Start with the straightest side of your seat and make sure the fabric is spread with a smooth, tight fit.
     
    Repeat this step with the opposite side of the seat - and again with the remaining sides. Continue to make sure that the fabric does not bunch or wrinkle on the visible part of the seating surface - this most likely will require you to hold the stretched fabric firmly while stapling all sides.

    If you do happen to make a mistake, be sure to have an upholstery staple remover nearby, such as the Spotnails P-97482 heavy-duty upholstery staple remover.
     
    We're almost done, however, you must first pleat the corners of the fabric on the underside of the cushion and trim away excess fabric. To pleat the corners, point the corner toward the center and fold both edges so that they run along the chair bottom's diagonal. Once folded, take your staple gun and fasten.

    The cushion is now ready to be screwed back into the base of the chair. Before reinstalling, you might want to spray a fabric protector onto the seating surface to prevent staining and reduce wear. Allow a day or two for the spray on application to dry before reattaching the seating surface.
     
    Congratulations, you now have a refreshed dining room set that can completely reinvent the design of your room. For the more experienced DIY expert, you might even sand down the chair frames and table, and refinish with a new stain or paint - if working with wood furniture.
     
    Want to see more projects like this one? Visit the Nail Gun Network's How To Page today for tips and tricks to get the job done.
     
    Helping You Build The Next Great Project,
    The Team At Nail Gun Depot

    Read More
  • Practicing Nail Gun & Power Tool Safety

    You have your nailer, stapler or screw gun; you have the proper accessories to tackle your project – but do you practice safety awareness when using your tools? Most job related accidents can be avoided, if you take the proper measures to ensure safety on the job site.

     

    For a 58 year-old carpenter living in Minnesota, a simple mistake almost cost his life, when he accidentally fired a 3-1/2” galvanized framing nail directly into his heart. While building a deck, the man’s framing nailer slipped out of his hands – and when he caught hold of it, hand still on the trigger, the gun’s nose bumped against his chest and fired directly into his heart. Thankfully, the nail missed his main arteries by millimeters, and he survived the ordeal after surgery, avoiding a lethal scenario. You can read the entire story here.

     

    The nail was a lucky miss, but let’s take a look at how this accident could have been avoided. In this example, a simple error could have completely altered the outcome, if the man had removed his hand from the trigger. Even bump action guns still require a suppressed trigger to fire, a safety feature most manufacturers include on their tools. If you feel as if you are going to loose hold of your nail gun or other tool, always take your hand off the trigger. Worst case, a broken tool is better than a life altering injury.

     

    A factor that helped to save this man’s life – staying calm and avoiding panic. Panic increases blood flow, which can increase bleeding from open wounds. In this example where a heart was pierced, panicking could have further reduced his ability to breath, leading to hyperventilation. Staying calm and contacting emergency medical services immediately will improve chances of survival, in life threatening situations. Treat for shock while help is on its way.

     

    As described in the instance above, nail guns are powerful tools, so let’s make sure you are set up for success, which starts with safe handling:

     

    • Start by knowing your tool and how it functions. Read the owner’s manual and look at warnings listed by the manufacturer.
    • Wear the appropriate safety gear for your job site. Safety glasses should always be worn, regardless of the project. Depending on your line of work, a hardhat, hearing protection, harness or gloves might also be required.
    • ALWAYS keep your tool pointed away from yourself and anyone else, especially when activated. When in doubt, treat your nail gun as you would treat any other firearm.
    • Don’t use a tool that is not functioning properly. Have any broken or damaged tool serviced before trying to use.
    • Do not try to drive fasteners on top of other fasteners. This can lead to misfire or backfire – resulting in injury.

     

    There is no guarantee that injury will not occur when handling your tools – on and off the job site – but practicing safety measures, such as the ones mentioned above, will increase your odds of avoiding injury and staying safe when using your nail gun or other tools.

     

    Stay Safe,

    The Team At Nail Gun Depot

    Read More
  • Getting Ready For The Holidays

    The holiday season is now in full-swing, so what are you doing to make merry this year? Depending on where you live, it's probably too cold to work outdoors (unless absolutely necessary) - which means it's the perfect time to get projects done around the house, in preparation for visiting friends and family. You might not have time to renovate the entire bathroom or put in a new kitchen, but consider these simple weekend projects that can spruce up your home - and even add value.

     

    Add a chair rail in the dining room:

    The dining room is one of the busiest rooms in many households during the holidays. Between family dinners and holiday parties, it's certain to see a lot of traffic from your guests.

    Installing a chair rail can serve more than one purpose in your home - it not only adds detail to the room, it also helps to protect your walls from scrapes and scratches. Using a Finish Nail Gun, such as the Paslode IM250A-Li, can help you complete this project with ease. Depending on the size of your dining room, installation can be completed in a relatively short amount of time, leaving your room with an added detail that improves its form and function.

    Tip: Make sure the rail is level before attaching. This is a simple step that is often overlooked, but can save time and money in the long run. If your home has crown molding, try to match the color and style of the rail for continuity.

     

    Update the numbers on the front of your house:

    We know, this IS an outdoor project, but it can be completed in a matter of minutes and will help any first-time guests find your house with ease. Simply visit any local hardware store to purchase the numbers you need for your address. A Screw Gun, such as the Senco DuraSpin, can be of use in attaching them to your home, depending on the material you are affixing them to (brick and other stone materials will require something heavier duty).

    This quick project can improve the curb appeal of your home and will certainly be appreciated by any visitors looking for your house.

     

    Build a new mantel for the fireplace:

    This might be a bit harder for the average DIYer, but can add tons of character to your home if completed properly. If you don't have a fireplace, you can improvise by building shelving to display decorations and other knickknacks.

    Design the mantel to fit your style and character - there are a lot of sites online that can fuel your inspiration. Once you have selected the perfect design for your home, plan to invest at least five to ten hours (or more) into this project.

    A Finish Nailer, such as the Bostitch N62FNK-2 will most likely be your tool of choice when assembling the big parts - although you might also consider a Pin Nailer, such as the Grex P650L 23ga. Pinner, if attaching smaller, more intricate details - such as trim.

    Tip: Some people prefer to paint their mantel rather than stain it; keep this in mind as you visualize what the finished project will look like. Depending on the design you choose, you might have to paint or stain the materials prior to assembling.

     

    Good Luck & Happy Holidays,

    The Team At Nail Gun Depot

    Read More
  • How To Choose A Nail Gun For Your Project

    You've decided to use a nail gun on your next project, but what type of nailer do you need? Nail guns come in a variety of shapes and sizes depending on the project you need it to complete. To learn what makes each type of nail gun unique, let's look at some of the main ones homeowners use:

    • Framing nail gun - This type of nail gun is used for larger projects such as fencing, deck building, sub-flooring and (of course) framing. These nailers are also excellent for projects involving plaster, as hammering can crack and loosen plaster.
    • Finish nail gun - This nail gun drives either 15 or 16 gauge nails - depending on the finish nailer - and is used for crown molding, baseboards, cabinets, chair rails, wood furniture, decorative trim, millwork, caskets, hardwood flooring, furniture and paneling. Finish nails are sturdy enough to hold these larger pieces, but small enough that they can be puttied over for the finished product.

    FinishPro42XP

    • Brad nail gun - A brad nailer drives even smaller, 18 gauge brad nails, versus a finish nailer. Brad nailers are used for smaller trim, as larger nails can split the wood. Using a hammer to drive brad nails can be frustrating due to their ultra-thin pins that can bend easily.

    Hitachi NT50AE2

    Now you need to decide how to power your nail gun:

    • Gas-powered - This nail gun uses a fuel cell with a rechargeable battery. This nailer does not require an air compressor, hose or cord - which makes it convenient. However, this is a more costly way to power your nailer.
    • Air powered or pneumatic - This is the most popular choice for power fastening tools, as it is a cheap, powerful and convenient way to power your nail gun. This nail gun uses compressed air to drive nails. If you choose pneumatic, make sure that the air requirement for the nail gun and the compressor match - ensuring your nail gun will work properly.
    Bostitch Pneumatic Finish Nailer

    Don't forget to consider the brand when making your decision, trusted brands such as Stanley Bostitch, Hitachi, Senco or Paslode will usually lead to less jams and repairs. Nail guns can speed up a job, allow you to drive nails into hard to reach areas, and drive smaller nails without the frustration of bending or breaking. NailGunDepot.com offers a wide selection of nailers, so check us out - and good luck on your next project!

    Nail Your Next Project,
    The Team At Nail Gun Depot
    Read More
  • Welcome To Nail Gun Depot's Blog - The Nail Gun Network

    Nail Gun Depot is pleased to announce the re-launch of its blog and content library, coined "The Nail Gun Network" - or "Nail Gun Network" for short. Beginning as a basic tool and fastener blog that was launched in June 2011, Nail Gun Depot phased in the Nail Gun Network brand starting in 2014, in preparation for the brand's 15th anniversary. Please stay tuned for project tips, tool news and all-else relevant to the tool and fastener industry. Get great "how to" advice for DIY applications - and contractor-grade tips for the professionals.
    Nail Gun Depot's Nail Gun Network
    Have a topic you want us to talk about, drop us a line at sales@nailgundepot.com and tell us what you want to see on The Nail Gun Network.
     
    **This post has been modified and updated to reflect advancements at Nail Gun Depot. Original post was updated on February 10, 2015.
    Read More

Items 51 to 58 of 58 total

  1. Page
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. 6
  8. of 6
  9. NEXT
Copyright © 2017 Nail Gun Depot All rights reserved. All trademarks and brands are property of their respective owner