CALL CART ACCOUNT

ITEMS IN CART: 0

$0.00

translate
Staple Guns
Staple Guns
  • New On Nail Gun Depot - Tools

    Every now and then, we like to talk about some of the new and exciting tools we've added to our collection, here at Nail Gun Depot. As we wrap up the summer and prepare for fall, let's look at some of our most recent additions to Nail Gun Depot.
    Let's start with a tool for industrial applications, BeA's Bar Code and Label Stapling tool, designed specifically for lumber tagging applications. The BeA 380/10-400 is a 20 gauge bar code & label stapler that is designed for use with 3/8" x 1/2" crown BeA 80 Series fine wire staples. Intended for lumber tagging, this tool is excellent for lumber yards and distribution centers. With a heritage of producing tools for industrial manufacturing, BeA offers a comprehensive selection of manual and automated stapling, corrugated and hog ring tools. The BeA 380/10-400 makes bar code stapling easy, featuring one-handed operation and a compact, full-metal design. This tool applies a label and staple at the same time for fast, efficient use.
    BeA Bar Code Tagging Stapler
    For the DIY'er, renovator or woodworker, check out the Cadex CB18.50A, 18 gauge brad nailer (replaced by Cadex V2/18.50 18 gauge brad nailer). New to Nail Gun Depot, this brad nailer is engineered for smooth, quiet, compact operation. This tool features a unique built-in air blower that can be used to clear dust and debris from an application area. Other features on the CB18.50A include combination trigger for single and bump fire, large magazine window, quick release nose for jam clearing, side-load magazine, adjustable depth, comfort grip handle, rear exhaust, 360 degree movable coupler, no-mar tip, anti-dry fire mechanism, and a carrying case. The Cadex CB18.50A is perfect for furniture, door and window, beading, cabinet and drawer assembly, boat construction, skirting board fixing, wire covers, matchboarding, shoemaking, panel and frame assembly, trim panels and decorative trim.
    Cadex CB18.50A
    Another specialty tool worth looking at, the Jaaco NPCN-7312 wire coil concrete and steel ballistic pin nailer is designed for securing foam/insulation board to steel, concrete or block. This NailPro tool from Jaaco drives 15 degree 1-1/4" to 3-1/2" ballistic pins with optional washers and attachments available. Additional applications for the Jaaco NPCN-7312 include stucco into steel (washer curves to avoid damaging the surface), with knurled pins featuring surface etching to allow for steel penetration and a ballistic or rounded point for entry. Click here to see a tool demonstration.
    Jaaco NPCN-7312
    New technology with an even newer deal, Senco is now offering the DS215-18V DuraSpin cordless screw gun with a FREE 18V cut-out saw, when you purchase a DS215-18V DuraSpin Promo Kit. A limited-quantity deal from Senco, get the best in cordless screw guns with Senco's DS-215 DuraSpin, which is capable of driving up to 2" collated screws with 5,000 RPM's of power. Users agree that this tool is perfect for drywall installation, subflooring, cement board, underlayment, sheathing to steel, metal framing, steel decking and rigid foam insulation. Take advantage now, while supplies last.
     
    Senco DS215-18V DuraSpin Promo Kit
    Another game changer in the screw gun industry, CAMO tools is now offering its Edge Pro hidden fastening system for decks. With just enough time to rehab your deck before winter, the CAMO Edge Pro allows you to seamlessly install a wide variety of wood, composite or PVC 1" to 1-1/2" deckboards, driving each deck screw at a 45 degree angle into the edge of the deckboard - to provide a fastener-free decking surface. Previously available for use with individual screws only, the Edge Pro is designed to drive CAMO 2-3/8" ProTech coated, collated carbon-steel deck screws. Secondary spacers can also be used for additional gap options.
     
    CAMO Edge Pro System
     
     
    Getting You The Latest & Greatest In Power Fastening Tools,
    The Team At Nail Gun Depot
    Read More
  • The Staple Gun Buying Guide

    Are you shopping for a pneumatic stapler? Maybe you already own one, but want to see what else is out there? If you are researching staple guns, look no further.
     
    As much as we love to talk about nail guns - after all, it's in our name - today, let's take a look at the various staple guns and pneumatic staplers that are available for construction, renovation and manufacturing.
     
    Staples Variety
    Let's start with one of the most commonly referenced segments within the staple gun industry - construction staplers. Available in several variations - depending on the application - you can choose between fine wire, narrow crown, medium crown and wide crown staplers. Fine wire construction staplers are generally used for furniture upholstery, light wood assembly, roof paper and insulation. Using a slightly larger staple, narrow crown staple guns or finish staplers are designed for applications that include: cabinets, casebacks, drawers, sheathing, underlayment, molding and trim. Next in line, medium crown staplers are capable of handling larger, more intense projects including: floor decking, roof sheathing, soft wall sheathing, subflooring, pallet construction, vinyl siding and insulation installation. The last and largest (size) segment of construction stapler, wide crown staple guns are built to handle the toughest of tough applications. These heavy-duty staplers are built for insulation sheathing, wire lathing, housewrap, attaching corrugated to pallets, furniture and cabinet frame assembly, or any other application that requires a wide crown staple. If you are looking for a solid, durable construction stapler, consider the MAX TA238A for smaller finish and trim applications, or the Senco WC150XP for larger projects.
     
    Senco WC150XP
    For less intense projects - primarily those that include upholstering or securing fabric - an upholstery stapler will be your best option. You will find that upholstery staplers commonly overlap with their fine wire construction stapler cousin. If you are strictly planning to use this pneumatic (or electric) tool for attaching upholstery, make sure the tool is specifically designed for upholstering - versus assembly. These staplers are particularly useful for furniture and vehicle upholstery, light wood assembly, dust covers, cabinet backs, felt insulation, roofing felt, molding, bedding and packaging. Our friends at ModHomeEc recommend the Duo-Fast EIC-3118 Electric Stapler (replaced by Fasco-Maestri 7C-16 3/8" Crown Electric Stapler - 63100) for the novice - or a BeA Long Nose Upholstery Stapler for long-term, skilled use. You can read their entire review of Nail Gun Depot here.
     
    Duo-Fast Upholstery Stapler
    For packaging and shipping, carton closing staplers are specifically designed to seal corrugated boxes and packaging materials. These tools are almost always found in warehouses or shipping facilities. For small to medium usage, consider a top carton stapler or plier stapler for package closing. For heavy-duty, high volume use, look to a larger carton closing tool - designed for manufacturing and assembly - such as a bench mounted carton stapler or post bottomer carton stapler. In the Nail Gun Depot shipping department, we are currently using Bostitch's latest cordless top carton closers, the DSW-3519 and DSW-3522.
     
    Bostitch Cordless Carton Closing Stapler
    Hammer staplers, also known as hammer tackers, are most commonly used for carpet, roof paper and housewrap installation. Similar to a hammer, these staplers are actuated each time the user brings the tool into contact with a surface - using a driving force. We recommend a variation of the Duo-Fast hammer tacker (replaced by Powernail HT-750 classic hammer stapler) for carpeting. For roofing or siding, consider a Stinger cap stapler.
     
    Stinger Hammer Cap Stapler
    Interested in flooring staplers? Check out our recent article on Must-Have Flooring Tools.
     
    Powernail Hardwood Floor Stapler
    Branching out from the typical staple gun(s) a builder or remodeler would come in contact with, there are several specialty staple guns available - such as bedding staplers and bar code staplers. Among a class of specialty fastening tools - mainly for manufacturing applications - bedding staplers are used for the production and manufacturing of mattresses and box spring sets. Designed for a different - yet equally important set of applications - bar code staplers (also known as label staplers) are used in construction, pallet/crating, packaging and residential interiors. Designed for stapling bar code tags to lumber, the BeA 380/10-400 is a powerful new addition to Nail Gun Depot's lineup of specialty tools.
     
    BeA Bar Code Stapler
    Need more information about a particular model or type of pneumatic, electric or manual staple gun? Just ask, we're here to help!
     
    Your Staple Gun Source,
    The Team At Nail Gun Depot
    Read More
  • Must-Have Flooring Tools & Accessories

    If you remodeled or built a home recently, you've probably considered hardwood or laminate flooring for at least one room of the house. A must-have feature in new home construction and older home renovation, hardwood and laminate flooring has grown significantly in popularity throughout the last 10-15 years. We've shown you "How To Install A Hardwood Floor," but what about the best tools to get the job done efficiently and effectively?
    Hardwood Floor
    To begin, let's recap the two traditional flooring tools that are available, flooring nailers or flooring staplers. For an in-depth look at the difference between these tools, check out "The Difference Between Floor Nailers & Flooring Staplers."
    Bostitch Floor Tool
    Determining which type of flooring tool to use is up to you. Today, we're just looking at a few of the best tools from each category, available for use on hardwood and laminate flooring applications.
    Powernail Stapler
    Let's start with flooring staplers. If you are looking for a top-of-the-line hardwood stapler, Bostitch offers an industry-leading line of flooring staple guns to choose from. Pneumatic or air-powered, two top-selling models include the Bostitch MIIIFS and the Bostitch EHF1838K. The biggest difference between these models, the MIIIFS is mallet-actuated (meaning you must strike the tool with a rubber mallet to drive the staple), whereas the EHF1838K is trigger-actuated. The MIIIFS is considered the flagship model of Bostitch floor staplers, but for many, the trigger-actuated firing of the EHF1838K is more desirable - especially for DIY users.
    Bostitch MIIIFS
    If you are looking for a less expensive option, 3 PRO is an up-and-coming brand that offers less expensive, durable flooring staplers. Models such as the 3 PRO S9032P and 3 PRO S9040P are inexpensive hardwood tools that are designed to compete with higher-end models from well-known manufacturers. The 3 PRO FSN50 not only drives flooring staples, it can also be used as a nailer.
    3 PRO FSN50
    Moving into floor nailers, you have the option to choose between manual or pneumatic powered tools. Just to refresh, as we mentioned earlier, pneumatic tools are powered by air compressor, whereas a manual floor nailer is powered by human force. Bostitch and Powernail offer a few popular manual tools, but many opt for the easier to operate pneumatic models.
    Wood Floor Thickness
    Two popular pneumatic floor nailers, the Bostitch MIIIFN (the nailer variation of the MIIIFS) and the Powernail 2000 (replaced by Powernail 2000F) come recommended by many users. Again, the MIIIFN is mallet-actuated - as are most pneumatic hardwood nailers and staplers - whereas the Model 2000 relies on a trigger to fire.
    Powernail 2000
    A secondary tool that's worth considering, palm nailers are also frequently used to secure the initial floor board at the base of a wall. Don't underestimate the versatility of these tools - though we don't recommend using a palm nailer for bulk nailing applications. Built specifically for flooring applications, the Powernail Power Palm face nailer is designed with a special nose that allows it to accept flooring nails, an excellent option for hardwood flooring.
    Powernail Power Palm
    There are many other flooring tools to choose from, so don't feel limited to these models - including many others that also come highly-recommended - so be sure to look at all of your available options before selecting a tool. Also, keep in mind that each of these tools runs a specific range and type of fastener, so be sure that the range is relevant to the application.
     

    Your Floor Tool Experts,
    The Team At Nail Gun Depot

    Read More
  • The MAX Tools Buying Guide On Nail Gun Depot

    This year, MAX Tools USA is celebrating its 20th anniversary of serving the construction, renovation and manufacturing trades of North America. A brand recognized for the quality, integrity and durability of its tools, MAX is among the best power fastening tool manufacturers within the industry. Learn about some of MAX's top tools to own, right here on the Nail Gun Network.

    MAX 20th Anniversary

    Let's start small and work our way up, as we introduce MAX's line of finish nailers and staplers.The MAX NF565/16 16 gauge finish nailer, weighing in at only 3.5 lbs., is among the lightest in its class. A powerful motor and patented drive system ensures consistent driving - despite the intensity of an application. The NF565/16 features a selectable trigger for sequential or bump fire operation, on board depth control, easy jam clearing system, belt hook and 360 degree adjustable exhaust - to direct air away from user. Applications for this tool include door and window casings, decorative boards, panel assembly, moldings, furniture assembly, case back fastening, blind pinning and cabinet assembly.

    MAX Finish Tools

    Likewise, the MAX NF255F/18 18 Gauge Brad Nailer features a thread style driver unit, high composite bumper, and slim body - easily reaching into tight quarters. A selectable trigger allows this tool to fire sequentially or upon contact. As with most brad nailers, the MAX NF255F/18 excels at applications including: door and window casings, plywood, decorative boards, interior finish work, panel assembly, moldings, subflooring, furniture assembly including drawer case-back nailing, blind pinning, cabinet assembly and other finishing projects.

    Shifting gears, finish staplers are quickly becoming a popular alternative to finish nailers. The MAX TA238A/18-6 narrow crown finish stapler is no exception to this trend. Featuring a one-inch slim nose, rapid fire trigger valve, lock out mechanism, fastener window, rear exhaust, trigger lock and comfortable rubber grip - you'll definitely want to keep an eye on this pneumatic stapler. Keep in mind, finish staplers are perfect for door and window casings, molding, underlayment, cabinet assembly and soffits - among other finishing projects.
     
    MAX Finish Tool

    Moving on to larger tools, MAX offers a wide selection of framing, roofing, pallet and concrete nailers to choose from. While we don't have the space to cover each product, the following products are a few industry favorites.

    MAX Logo

    Looking for a lightweight framing nailer? Look no further than the MAX SN883RH2 (replaced by MAX SN883RH3). Featuring a patented, double-fire mechanism for increased safety, an adjustable depth control, maintenance free end cap filter, aggressive sawtooth safety, comfortable rubber hand grip, trigger lock and magnetic nose - this tool sits at the top of our list for quality, affordable framing tools. Don't take our word for it, see what Tools of the Trade Magazine says about the SN883RH2.

    MAX SN883RH2

    If you are manufacturing pallets or crates, check out the MAX CN70 coil pallet nailer. Available with or without a magazine assembly, depending on the application it is being used for, the CN70 features a heavy-duty dust cover, body protector, adjustable exhaust, metal nail tray, narrow nose for accurate nail placement, comfort grip and tough nylon magazine - making it perfect for pallet building, crating, fencing, framing, sheathing, subflooring and more.

    MAX NGD Ad

    Last, but certainly not least, refreshed and updated, the MAX CN565S2 SuperSider coil siding nailer is lighter weight, more durable and less expensive that its predecessor. At only 5 lbs., this tool is easy to handle for extended periods of time, and features a maintenance free end cap filter - to prevent dust and debris from entering the tool, easy-load magazine, adjustable depth of drive, adjustable exhaust, anti-double fire mechanism and non-marring contact tip. Look to use this pneumatic tool for high-volume siding, fencing, exterior trim, sheathing, subfloor, roof decking, exterior decking, furring and strapping applications.

     

    Getting You The Max Out Of Your MAX,
    The Team At Nail Gun Depot

    Read More
  • What's A Cap Stapler/Nailer - And Why Should I Use One?

    If you work with housewrap or roofing underlayments, and you are still using a standard hammer-tacker, it's time to think about an upgrade that can improve the quality of your work - and ultimately increase productivity on the job. If you saw the title, you already know we're talking about adding a cap tool (stapler or nailer) to your arsenal. There are quite a few options available, including tools from Bostitch, Senco, Hitachi and Paslode, but one brand that specializes in cap nailers and cap staplers, Stinger Cap Systems' specifically designs their tools for applications that require a cap nail or cap staple.
     
    Stinger CN100
    What's the benefit of a cap fastener over a standard staple? The cap helps to protect and expand the surface area (holding power) of the fastener - which means the fastener is better able to withstand harsh weather conditions - protecting the housewrap or fabric from separating or tearing. Many manufacturers require capped fasteners be used with their wrap or felt, due to the increased strength and protection they provide. Cap tools can also be used for a variety of other applications including foam board installation, carpet padding and more. In other words, these tools are perfect for any material that is thick, but maintains a soft consistency.
     
    Stinger Cap Tool
    If you are looking at cap nailers, there are a couple good options available, which include the Hitachi NV50AP3 and Bostitch N66BC-1; if you are looking to drive a larger and wider range of fasteners. If you are looking for a smaller cap nail (1" to be precise), we suggest the Stinger CN100. Similar to a cap stapler, these tools are designed for roofing, sidewall and insulation board - check with the material manufacturer to determine whether a nail or staple is required for your application.
     
    Senco BC58
    Moving into cap staplers, a few of the more popular options, look to Senco's BC58 cap button stapler, Paslode's CS150 cap stapler, Pneu Tools Rap-A-Cap 58 (RC-58), and of course, Stinger brand cap tools - including the CH38 (manual fire), CH38A (auto fire) and CS150 (air-powered) cap tools. Depending on the material - and surface it is being installed to - you will need to determine whether a nail or staple is necessary for your application.
     
    Paslode CS150
    Before you buy a cap tool, be sure to consider these factors: manual vs. auto-firing tool; the role that tool weight and balance plays on your application; and the level of maneuverability required for the job. For heavy-duty, high-volume use, you will most likely choose an auto-fire cap tool. The benefit to a manual cap stapler, such as the Stinger CH38, the tool is lightweight and smaller in size - which makes it easier to maneuver. For most pneumatic variations of cap stapler, plan on any of the tools previously mentioned weighing between four and five pounds - before caps and staples have been loaded. Pneumatic tools also require an air compressor to operate, another factor that should be taken into consideration depending on the flexibility of your jobsite.
     
    Stinger CH38
    Need additional help? Let one of our trained technicians guide you to the perfect cap tool for your project.
     
    Capping Your Fastening Tool Knowledge,
    The Team At Nail Gun Depot
    Read More
  • Which Woodworking Tool Do I Need For My Project?

    Getting ready to start a woodworking project? Maybe you aren't sure what tool(s) you need to complete your project? Let's take a look at some of the tools you might need to tackle woodworking - whether you are starting your first project or adding a new tool to your collection.
     
    Bostitch Finish Nailer
    There isn't one specific woodworking tool that is more important than another for your workshop - it really just depends on the project you are looking to take on. Unless you get a battery-powered, cordless fastening tool, you will need an air compressor to power any nail gun or staple gun you purchase. If you get a screw gun, such as Senco DuraSpin, you can choose between battery or electric power - in other words, no need for an air compressor.
     
    Bostitch Compressor
    If you are just getting into woodworking or DIY projects around the home, you will probably want to start with a finish, brad or pin nailer, as these tools are most commonly selected for smaller woodworking projects such as furniture and cabinet building, trim work and craft projects.
     
    OMER 12.40
    Looking for something a bit larger to build? For sheds, home additions, tree houses - or anything else that requires a structural frame - you will need a framing nailer. These nail guns have the power to drive large framing nails, which are minimum-mandatory for any structural project. Once a structure has been framed, you might find a screw gun useful for adding any finishing touches to your project, such as drywall, deck boards, subfloor and more.
     
    Similar to a finish nailer, you might also consider a finish stapler - depending on the small project you are working on. Staple guns can be particularly useful for furniture and upholstery projects. Upholstery staplers are an absolute must-have tool if you are considering refinishing a chair or sofa.
     
    Duo-Fast Furniture
    Last, but not least, don't rule out a palm nailer as a viable option for less intense projects - particularly ones that require touch-up with hard to reach areas. A palm nailer is typically used for framing, decking, fencing, pole barns, metal connector straps and other similar applications. While palm nail guns don't offer the benefit of a collated drive to hold a large capacity of fasteners, palm nailers are small, and capable of reaching hard to access areas - where a large tool would not be able to fit. Another benefit to palm nailers, you can find most priced below $100.
     
    Senco Palm Nailer
    Ready to start your project? Need more help? Our trained customer service team is ready to pair you with the perfect fastening tool for your project.
     
    Your Woodworking Experts,
    The Team At Nail Gun Depot
    Read More
  • How To Get The Most From Your Pneumatic Staple Gun

    Are you learning how to use a pneumatic stapler? Get the most out of your staple gun - find out how right here on the Nail Gun Network, by Nail Gun Depot.
    Let's start with loading the tool. Loading a staple gun can vary from tool to tool; however, the following provides general instruction for loading a typical pneumatic stapler.

    Before you start, it's crucial that you have the proper staples. The type of staple that your tool takes will vary from model to model, and manufacturer to manufacturer. Check your tool's specs or manual if you are confused about the type of staple it takes.You can also search for your tool's staples using the Fastener Finder on NGD.

    Once you have identified the correct staples, you need to load them. Most staple guns come in either a top or bottom loading variation. Medium and heavy wire pneumatic staplers generally load from the top, while most fine wire staplers load from the bottom.

    Before loading, be sure to disconnect the air supply and keep the stapler pointed away from you at all times - as you should for any firing tool.

    For a top loading stapler, pull the magazine follower back until it locks into position. After the follower is locked into position, place the strip of staples over the magazine rail. The staples should move freely, back and forth on the rail. The last step is to unlock the follower and release it - so that it pushes the staples into the nose of the staple gun for firing.

    If you have a bottom load stapler, locate the release first - which is generally found at the rear of magazine. Depress the release and slide the magazine rail away from the nose. Turn the stapler upside down and insert the staples into the channel, towards the nose of the stapler. Make sure the pointed ends of the staples are loaded - so they will fire into your application. After the staples have been loaded, slide the magazine rail back, towards the nose, until it locks into place. Now you are ready to connect your air supply and test fire.

    Staple guns are designed for a variety of applications, from upholstering furniture to decking and siding applications. With more than 200 available options on NGD, we're confident you can find the right stapler to get your project done right.

    Your Source For Staple Gun Knowledge,
    The Team At Nail Gun Depot
    Read More
  • Bostitch Cordless Carton Closing Staplers & Other New Tools

    While many have been out enjoying the summer, we've been busy adding new products to the Nail Gun Depot. From cordless carton closing staplers, to a new line of pallet nailers - and everything in between - we've got you covered. Be sure to check out the all-new Nail Gun Network, by Nail Gun Depot, for updates on tools, project ideas and how-to tips.
     
    If you work in manufacturing, or are frequently assembling packaging materials, the Bostitch DSW-3519 and the Bostitch DSW-3522 are two excellent options for carton closing. The first of their kind, these carton closing staplers are completely cordless - each comes with (2) lithium ion batteries. Talk about packing a punch, these carton closers from Bostitch can drive up to 800 staples per 45 minute charge. Eliminating an air hose makes these tools extremely versatile, which means you can take them where you need them. These two tools are perfect for large, industrial warehouses - and small businesses alike. Start increasing your productivity now, when you use the Bostitch DSW-3519 or the Bostitch DSW-3522.
     
    Need a new pallet nailer for pallet and crate building? Look no further than our latest product line added to the site, a full range of wire-coil pallet nail guns by Everwin Pneumatic. From high-volume, to small scale operations - Everwin offers a tool that is competitive with other industry-leading brands. Starting with the PN57 and the more powerful PN57PP, these industrial pallet nailing tools are perfect for standard pallet and crate building operations. A PN70 model offers a slightly increased range in fastener length - while each of these tools require 15 degree wire-coil pallet nails. For heavy-duty, high-volume applications, the Everwin PN100 will drive the longest length fastener - running pallet nails from 2-1/2" to 4" long. If you are looking for a competitive quality, budget friendly pallet and crate building tool, look no further than the latest offerings from Everwin Pneumatic.
     
    Maybe you are looking for a framing nailer instead of a pallet tool. If that's the case, Pneu Tools has a couple high-range options that can now be found on Nail Gun Depot. The Pneu Tools SN22130 and the SN22160 22 degree, plastic strip framing nailers are designed to handle a longer length nail - compared to the ordinary framing nail gun. The SN22130 is designed to run 3-1/2" to 5-1/8" fasteners, while the SN22160 takes 4" to 6-1/4" framing nails. Both models feature an aluminum body, sequential fire trigger, adjustable depth, and a high-capacity magazine. These tools are designed to go above and beyond - perfect for pole barn assembly and post/beam installation.
     
    Last, but certainly not least, MAX has released an updated and improved version of their SuperSider siding coil nailer, the CN565S2. Refined and improved, the MAX CN565S2 features a lighter design, more power, and a slim-nose contact arm for improved accuracy. Best of all, this tool is $10 less expensive than its predecessor.
     
    Want more information, visit each of these items on Nail Gun Depot for a full list of features and available fasteners.
     
    Your Nail Gun Experts,
    The Team At Nail Gun Depot
    Read More
  • How To Choose The Right Upholstery Stapler

    Remodeling a chair or piece of furniture? If you work with - or are planning to do upholstery work - you will want to find an upholstery stapler that properly suits your needs. To the novice, you will want to select your staple gun based on its specific application. Upholstery staplers are designed for applications that range from industrial use to amateur fabric work. Finding the right one for you can be easy - if you know what to look for.

    For those just getting into upholstering, you will probably want to select your stapler based on the application you are intending to use it for. First, you will need to measure the material you are working with, to determine the gauge (thickness), crown (width) and leg (length) of the staple necessary for your project. Once you know the gauge of staple needed, you can find the appropriate stapler - you will also see that a variety of brands are available to choose from including Senco, BeA, Duo-Fast, Spotnails, Grex and more.

    Depending on the thickness of material, you will probably choose between a 20 gauge or 22 gauge upholstery stapler. Next you will need to decide whether you want a pneumatic (air-powered) tool or an electric tool. If you do not have an air compressor, an electric tool will bypass the need for one - however, pneumatic upholstery staplers are typically less expensive. One of Nail Gun Depot's most popular items, the Duo-Fast EIC-3118 electric upholstery stapler (replaced by Fasco-Maestri 7C-16 3/8" crown electric stapler) eliminates the need for an air compressor - without sacrificing performance.

    Once you have gained some additional experience, you might want to upgrade to a long nose upholstery stapler. The extended nose on these staple guns allows them to reach into tighter spaces. The BeA 71/16-436LN long nose, pneumatic upholstery stapler, is a top of the line tool that comes recommended by many upholsterers - including the writers at ModHomeEc. You can see their review of Nail Gun Depot's stapler selection here. Long nose upholstery staplers are typically used for more skilled projects, projects that require a higher level of intricacy. If you are sticking to small, simple upholstery work, using a regular nose upholstery stapler should yield the necessary results for your project.

     

    Helping You Fabricate Your Next Project,

    The Team At Nail Gun Depot

    Read More
  • Tools And Projects That Are Worth The Investment

    Are you getting ready to start a new home improvement project, know the category of tool you need, but can't decide whether it's worth spending extra to get a top of the line model? We usually talk about tool categories for a project, but what about the features of a tool that makes it unique to the competition? Today, we're going to focus on a few of our favorite tools to splurge on, paired with the projects they are built to tackle. Learn which tools and projects are worth the investment.

    Let's start from the ground up, finding the right Framing Nailer to fasten the bones or frame of your project. One of the most popular choices according to Nail Gun Depot's customers, the Paslode CF325Li (902600) cordless framing nailer (replaced by Paslode CF325XP) is built to handle heavy duty work, with long term success. This framing nail gun drives 2" to 3-1/4" 30 degree paper tape strip nails without a cord or compressor. Powered by a fuel cell and rechargeable battery, reach the unreachable - this is the perfect framing tool for tight fitting spaces. Thinking about finishing a basement? This Paslode is the perfect tool to frame your walls. The CF325Li is a popular, contractor grade tool that gets a thumbs up from our customers.

    Once framing is complete, most contractors will use a screw gun to attach drywall to the wood studs. Available in both battery-powered and electrical-powered variations, the Senco DuraSpin Collated Screw System is among the most popular options available on the market today. Trusted by contractors for their quality and versatility, Senco's DuraSpin screw guns drive a range of collated screws from 5/8" to 3" in size. If you're in the market, look at the DS312-18V or DS332-AC to maximize the available range of screws accepted.

    PROJECT NOTE: If finishing a basement, stick to the basics. Less is more in many instances. Putting a lot of intricate detail and fancy upgrades into a basement does not typically return the investment. Unless budget is no object, look at tasteful updates that will boost resale value.

    Another popular upgrade, you might be looking to install new hardwood floors in your home. Hardwood flooring can add big value to a home and can help make it more attractive to a prospective buyer, if it is done correctly. Starting a hardwood installation properly means using tools to get the job done right - which is exactly why we recommend our next tool to splurge on. Known for making quality flooring tools, the Bostitch MIIIFS Hardwood Floor Stapler is one of the best-selling floor staplers offered at Nail Gun Depot. This flooring stapler has passed the test of time - and comes with a seven-year warranty to support its reputation. A quality pneumatic tool, the MIIIFS drives 15.5 gauge 1/2" crown flooring staples from 1-1/2" to 2" in length.

    PROJECT NOTE: Be sure to know the thickness of the floors you are installing. The typical range of thickness is 1/2" to 3/4" flooring, though other variations are available. Compare different breeds of wood to see which hardwood floor will match your walls and furniture best.

    Ready for small, around the house updates? For trim, molding, shelves, cabinets and more, you'll be looking for either a Finish or Brad Nailer. Once again, Senco is at the top of our must-have tool list with their Fusion line of Cordless Finish and Brad Nailers, which are among the most competitive options available to the market today. Models of the Fusion include the F-15, a 15 Gauge Angled Finish Nailer; the F-16A, a 16 Gauge Angled Finish Nailer; the F-16S, a 16 Gauge Straight Finish Nailer; and the F-18, an 18 Gauge Brad Nailer. These battery-powered finishing tools have been recognized by top-tier industry publications including Popular Mechanics and the Journal of Light Construction, thanks to their durability, versatility and available features.

    PROJECT NOTE: Adding crown molding to your home can infinitely improve appearance - and even boost resale value. This is an inexpensive upgrade that can payoff big when trying to sell your home. Look to match crown molding and baseboards for an aesthetically pleasing design. When working with a dining room or living space, consider adding a matching chair rail too.

    Last but not least, you have a fresh, new look for your home, but need some new furniture and decor to add that final, personal touch. When you've run out of ways to improve your house itself, look for ways to compliment its design - through decor. One way to do this is through refinishing and reupholstering furniture. For all of your upholstery work, make sure you choose a staple gun with the capability to take on a wide range of projects, which is why we recommend the Duo-Fast EIC-3118 (66118) 22 Gauge Electric Upholstery Stapler (replaced by Fasco-Maestri 7C-16 3/8" Crown Electric Stapler). This Duo-Fast upholstery stapler is electric powered, meaning there is no need for an air compressor. This tool will run 3/8" to 9/16" leg 22 gauge 3/8" crown fine wire staples, perfect for furniture upholstery and light wood assembly.

    PROJECT NOTE: Measure the length, width and depth of the seating pad and multiply three times the amount of any given dimension to calculate the amount of fabric you will need for your surface - this rule applies to a single surface, calculate for each chair separately. Measure from the longest point if working with a curved or angled shape.

    Ready to splurge on a quality, new tool? Contact Nail Gun Depot with any questions about these and other tools. Want to compare models? We can help with that too!

    Providing Tools That Get The Job Done Right,
    The Team At Nail Gun Depot

    Read More
  • Items 41 to 50 of 62 total

Copyright © 2017 Nail Gun Depot All rights reserved. All trademarks and brands are property of their respective owner