CALL CART ACCOUNT

ITEMS IN CART: 0

$0.00

translate
Tools & Fasteners
Tools & Fasteners
  • Grex GC1850 Cordless Brad Nailer Video Comparison

    The first of its kind, the Grex GC1850 cordless brad nailer is powered by 2 AAA batteries and fuel cell only. Capable of driving 18 gauge brad nails up to 2" in length, the Grex GC1850 is the only cordless brad nailer that is as small as a traditional air-operated finish nailer. An industry first, this cordless brad nailer is powered by 2 AAA alkaline batteries - that last at least 50,000 shots; and a fuel cell that lasts approximately 1,300 shots per cartridge. This Grex brad nailer eliminates battery related downtime - without sacrificing power. Watch and compare it to the competition here.

    Read More
  • Nailing Versus Stapling For Roof Shingles

    If you work in or around the U.S. roofing industry, an age-old question you are bound to hear - which is better, nailing or stapling roofing shingles? Get expert advice on both options, as well as tips to calculate materials usage and more!

    Let's start with stapling.

    In the past, when it came to the debate of roofing nails versus staples, the industry was split down the middle. After all, it's no surprise roofers loved staples for attaching shingles to roofing. Staples cost less than nails, offer exceptional holding strength, and cover a greater area of space with a more versatile and compact collation. Paired with the fact staplers are typically easier to handle than a coil nailer - and a stapler is less complex to repair - it's easy to see why stapling would be the preferred method for fastening shingles.

    Senco RoofPro 455XP Roofing Nailer

    PRO TIP: When estimating nail or staple usage for your roofing project, you should budget 400 nails or staples per square. Breaking it down further, you'll typically use four fasteners per 3-tab shingle. However, always consult your local building authority for exact code requirements.

    Bostitch Roofing Nailer

    Flash forward to present day, where coil roofing nails dominate the market. But what changed?

    Within the last two decades, the roofing industry has shifted its preference toward the roofing nail. What's ironic, it can actually be argued the staple has better holding power compared to the nail. Nonetheless, here's why coil roofing nails have gained such popularity over staples.

    Hitachi NV45AB2 Coil Roofing Nailer

    While many factors have led modern roofers to use nails more often than staples, the strongest argument doesn't actually involve the quality of either fastener, but rather depends on the patience and precision of the end user. The problem with attaching a shingle to roof using staples, if the positioning of the staple is not perpendicular to the shingle itself, holding strength is greatly compromised. Staples are also much easier to over-drive, or under-drive, both scenarios that can further contribute to holding issues. With roofing nails this issue doesn't exist, because the nail has a round head - just make sure the nail gets driven straight into the shingle.

    Other benefits to using coil roofing nails include higher capacity magazine load, adjustable depth of drive on most roofing nailers, and most roofing nails maintain a universal design for ease of compatibility.

    Stinger Cap Coil Roofing Nailer

    In some areas of the U.S. today, staples have even been banned from shingle to roof installation, due to the likelihood of improper installation. Depending on region, other regulations may dictate type of galvanization or coating, or even require stainless steel in coastal areas. As always, please confirm code requirements with your local building authority prior to starting a project.

     

    ~ The Team At Nail Gun Depot

    Read More
  • Video Spotlight: Hitachi NV90AG(S) Coil Framing Nailer

    The Hitachi NV90AG(S) air-powered coil framing nailer drives 15 degree coil framing nails from 1-3/4" to 3-1/2" in length. An all-new head guard design allows for quicker disassembly during maintenance. This Hitachi framing nailer features a selectable trigger, tool free depth of drive, side load magazine with tilting tray, open nose design for easy jam clearing, and a wide range of nail compatibility. This NV90AG(S) is excellent for applications in framing, pallet assembly, sheathing, deck building, siding installation, fencing and sub-flooring. The NV90AG(S) is a direct replacement for the previous generation Hitachi NV90AG coil nailer. Learn more here: http://bit.ly/2cNaYqD.

    Read More
  • First Look: Fasco Introduces A Cordless Fence Stapler

    Big news coming from Alabama, as Fasco has finally announced a cordless fencing stapler is on its way. Nail Gun Depot has the scoop before anyone else. Keep reading on the Nail Gun Network to learn more.

    If you're a fence builder, you've probably heard of Fasco's F46 40-315 pneumatic fence stapler, as it currently dominates the U.S. wire fencing industry. Up until now though, U.S. wire fence installers have been fairly limited in the fastening tools available to them - particularly when talking about cordless staplers. Fasco promises to change that.

    Fasco Cordless Fence Stapler

    The first of its kind from Fasco, the 11616F cordless fence stapler brings cordless technology to the U.S. fence building industry. Designed to drive the same 10.5 gauge fencing staples as its air-powered sibling, the Fasco 11616F cordless stapler operates via combined use of battery-power and fuel cell. Capable of firing 5,200 shots per battery charge, and 1,200 shots per fuel cartridge, Fasco's cordless fence staple gun offers the best in utility, reliability and performance.

    Fasco Fence Staples

    Most features from the Fasco F46 40-315 air-powered fencing stapler will carry over into the cordless model. In essence, it appears you'll get the same tool, but without the limitations of an air compressor and hose.

    Users will enjoy a laundry list of features on the Fasco 11616F cordless fencing stapler, some of which include a top load magazine, single-shot actuation, adjustable depth of drive, and comfort grip. Ideal for all types of wire fencing attached to wood, including chain link fences, barbed wire, hi tensile wire, animal cages, live stock panel closures and much more, this is the cordless fencing stapler we've been waiting for. And, you get a carrying case, spare battery, battery charger and two fuel cells included with the tool, compliments of Fasco.

    Fasco Cordless Fence Stapler Specs

    Don't forget. The Fasco 11616F does require both fuel cell and battery to operate. However, Fasco fuel cartridges can be interchanged with the Paslode 816000 IMCT red framer fuel cells.

    Fasco 11616F

    More to come, once we've put this tool through its paces in the field. Look for the Fasco 11616F to officially hit the market sometime in late Fall 2016. In the meantime, would you trade your air hose and go cordless with this new Fasco fencing stapler?

     

    ~The Team At Nail Gun Depot

    Read More
  • Name-Brand Quality On Budget - Everwin & SureFit Make A...

    There's a lot of "generic" competition when it comes to hardware and power tools. For the most part, these brands quickly earn a reputation for cheap, disposable products. But, every now and again, you find someone that gets it right. Those few select companies that can engineer a tool or fastener to name-brand specification, but still maintain bargain-brand pricing. Over the years, we've seen our share of winners - and losers - but two of our best finds yet are just now gaining the notoriety they deserve, especially when used together. That's right, we're talking about Everwin Pneumatic tools - paired with our top-quality lineup of SureFit fasteners.

    Everwin Tri-App

    Here's why these two should be on YOUR radar.

    Everwin Pneumatic may be relatively new to market, but they are far from inexperienced. In fact, the concept for Everwin was born in 2012, when several veteran tool engineers realized they could manufacture a pneumatic nailer, comparable in quality to products from Bostitch, Hitachi, MAX and others of the like, but without the vast overhead their competitors embrace.

    Everwin Tools

    The outcome? A rapidly growing selection of pneumatic nailers and staplers, built to match the name-brand build quality a contractor or assembler requires, but offered at a fraction of the cost.

    Everwin Pneumatic

    To date, Everwin has branched into several new categories of collated fastening tools, including wide and medium crown construction staplers, siding nailers, and carton closing staplers. Despite growth, Everwin's core product line, industrial coil nailers, remains the backbone of their business. Launching with the PN57 and PN70 model pallet nail guns, Everwin now offers more than ten industrial coil nailers, mostly pallet coil nailers for both handheld and automated use. To see Everwin's full selection of tools, click here.

    Everwin Construction Stapler

    Take the plunge, we promise you'll love your Everwin just as much as its brand-name counterpart. With money to spare. But wait, there's more...

    Everwin Pallet Nailer

    You'll need a quality fastener to go with your quality tool. We recommend SureFit fasteners, designed and built to brand-name specification - but available at a fraction of the cost. With a selection of collated framing nails, coil nails, roofing nails, hanger nails, finish nails, brads, carton staples, stick staples and several other series' to choose from, we suggest SureFit for any compatible nailer or stapler. Don't forget to add a box of SureFit nails or staples to your order!

    SureFit Nails

    Still need an extra push? How about discount freight shipping, delivered to your door. Your volume fastener order may qualify for special freight shipping rates on Nail Gun Depot. Check best available rates to your area during checkout.

     

    ~The Team At Nail Gun Depot

    Read More
  • Introducing The Paslode F-350P PowerMaster Pro

    It's not every day we get excited about a new tool coming to market, but when Paslode announced the F-350P PowerMaster Pro framing nailer was on its way, we already had our RounDrive framing nails in hand and ready to load. Get the first glimpse of this all-new paper strip framing nailer from Paslode, right here on the Nail Gun Network.

    As we've come to expect from Paslode, the F-350P PowerMaster Pro framing nailer (515000) is designed to drive nails consistently, minimizing downtime and maximizing productivity and efficiency. Designed to drive a complete range of 2" to 3-1/4" 30 degree RounDrive framing nails, the PowerMaster Pro features a lightweight and well-balanced design for improved usability and handling compared to previous models.

    Paslode PowerMaster Pro 515000

    Contractor-grade durability is a given for this 30 degree stick nailer. Not only designed to withstand the rigors of regular use, the Paslode F-350P PowerMaster Pro is built to handle what you throw at it. Additional features to help get the job done right include a dual finger trigger (choose between bump and sequential fire), rear loading magazine to reduce downtime, thumbwheel depth of drive, and work contact element with aggressive teeth to improve accuracy and installation time.

    The Paslode 515000 has a simple design with fewer moving components to ensure reliability and serviceability. To ensure downtime won't be an issue, the Paslode PowerMaster Pro comes with a manufacturer's one-year full warranty, which applies to all parts except those covered by its five-year extended limited warranty - which covers all housing and cap assembly castings.

    Paslode Tools

    According to Paslode, the all-new F-350P has been named the designated replacement tool for Paslode's 50th Anniversary F-350S (511990) framing nailer, which will be phased out in the coming months.

    Would you give this new Paslode a shot?

     

    ~The Team At Nail Gun Depot

    Read More
  • Nail Gun Depot Offers Discount Factory-Reconditioned Tools

    Nail Gun Depot is proud to announce its expansion into Factory-Reconditioned Tools. The launch of this pre-owned program – featuring a regular rotation of lightly-used, factory-reconditioned nailers, staplers and screw guns - is rolling out the "red" carpet with several Senco tools in its inaugural run. The perk to this program; customers can now own a like-new tool at a fraction of the cost.

    But, what about quality?

    The tools that come in as factory-reconditioned have only seen light use, often only used by a Weekend Warrior for a project or two, then returned. Prior to sale, each of our refurbished tools are inspected and serviced by trained technicians at the manufacturer. If required, repairs are made and factory-replacement parts are installed. These factory-reconditioned tools may show slight signs of use, but are sold in like-new working condition.

    Take a look at Nail Gun Depot's first batch of reconditioned tools:

    For heavy-duty construction, the Senco WC200XP (4Y0001R) factory-reconditioned wide crown stapler has a lightweight, well-balanced, and extremely durable design – making it a true workhorse. The WC200XP includes a new firing valve design for fast and powerful operation, EZ clear latch for fast jam removal, tool-free adjustable depth of drive, high-strength composite magazine, and durable exhaust cap for superior damage resistance. This heavy-duty stapler is excellent for lathing, attaching corrugated to skids, butt joints, furniture and cabinet frames.

    Senco 4Y0001R

    If you're looking for something a bit smaller, but still packing a punch, we have the Senco Fusion F-16S (6U0001R) factory-reconditioned cordless li-ion finish nailer. The 6U0001R features Senco’s innovative "Fusion" technology, eliminating the need for expensive fuel cells without compromising performance. Additional features include optional sequential or bump-fire operation, nose mounted LED light, adjustable and reversible belt hook, depth of drive, rugged aluminum magazine, and patented reflex shot design for instant firing. This Senco cordless finish nailer is excellent for molding, furniture, cabinet frames and more.

    Senco 6U0001R

    If you prefer the feel (and price) of a pneumatic finish nailer, consider the Senco FinishPro 18BMg (9B0001R) factory-reconditioned brad nailer. The Senco 9B0001R is designed with a lightweight magnesium body that improves user comfort and enhances durability. This brad nailer requires minimal maintenance thanks to its oil-free operation. Additional features include a nose-mounted LED light, narrow nose for tight spaces, metal cylinder for increased durability, and an EZ Clear latch that protects against fastener jams. The 9B0001R is great for cabinets, casing, paneling, woodworking and more.

    Senco 9B0001R

    For the roofer, we have the Senco RoofPro 455XP (3D0101R) factory-reconditioned coil roofing nailer. The Senco 3D0101R features a tool-free adjustable depth of drive, adjustable shingle guide, aluminum body for longer life, and steel wear plates to reduce shingle wear on the tool. This RoofPro nailer is designed for installing asphalt and fiberglass shingles, waterproof tar paper, insulation board, re-roofing and new roofs.

    Senco 3D0101R

    Installing drywall on a budget? No problem with the Senco DuraSpin DS235-AC (7T0001R) auto-feed screw system. The Senco DS235-AC features a fast 5,000 RPM motor – designed for contractor grade drywall installation. This corded (electric) screw gun is designed with a tool-free adjustable nose piece for different length screws, patented corner fit feed system for easy wall and corner access, adjustable depth of drive with depth lock, variable speed trigger with lock and reverse, rubber comfort grip, quick bit release, and 10 foot rubber cord. The 7T0001R is ideal for applications in drywall, subfloor, underlayment, cement board, sheathing to steel, metal framing and more.

    Senco 7T0001R

    Again, please remember that Nail Gun Depot's inventory of reconditioned tools will be constantly changing, as new factory-reconditioned items become available, and existing items are depleted. Be sure to order early to ensure availability - and check back often to see new items added.

    Are you ready to try recon?

     

    ~The Team At Nail Gun Depot

    Read More
  • Paslode Transitions To Lithium-Ion Cordless Power

    Remember when Paslode first released its industry-changing cordless Impulse nailers? Nailing was never the same.

    Yet again, Paslode is raising the stakes, taking their cordless nailers into the 21st Century with lithium-ion power. Just like before, each Paslode cordless tool still requires a fuel cell to operate; but now offers better range and improved ergonomics. The transition was recently completed, when Paslode released their IM200-Li cordless brad nailer.

    Paslode IM200-Li

    "Why Choose Paslode Cordless? Paslode Cordless offers durable and lightweight solutions to your everyday work. Not only does Paslode Cordless offer more balance and control, but it was made to withstand the tough jobsite conditions. Paslode Cordless Systems were built to keep up with you." ~ Paslode.com

    Paslode IM250S-Li

    Let's take a closer look at the full Paslode Li-Ion cordless lineup:

    When it comes to framing, Paslode's cordless framing nailer has enjoyed one of the longest running success stories in the business. The current generation Paslode CF325XP, which recently replaced the CF325-Li, offers the same benefits as its predecessor, but with 15% increased driving power, low temperature usability (tool works in conditions down to 14 degrees Fahrenheit - when using all-season orange fuel cell), and up to 50% longer run time per battery charge. Eligible for Paslode's 2 Year Service Promise, the CF325XP (905600) is also backed by a standard five-year warranty. This Paslode framing nailer is tried, tested - and now better than ever before.

    Paslode CF325XP

    Paslode doesn't stop with framing. Now boasting a full line of Li-Ion cordless finish and trim nailers, the Paslode brand has come full circle. Choose between a 16 gauge straight IM250S-Li (916000), 16 gauge angled IM250A-Li (902400), and the most recent addition - an 18 gauge brad nailer IM200-Li (918000). All lithium-ion - all ready to work.

    Paslode 916000

    Like the CF325XP, these Paslode Li-Ion cordless finish nailers are lighter weight (easier to carry and use), can be recharged quicker, and hold their charge for a longer range of time. Don't forget, these Paslode cordless finish nailers do still require a small yellow fuel cell to operate.

    Paslode Cordless Nail Gun Depot Promotion

    To celebrate this milestone, for a limited time get a FREE Paslode Yellow Finish Fuel (816007) or Orange Framing Fuel Cell (816008), when purchasing ANY Paslode lithium-ion framing or finish nailer on Nail Gun Depot. Deal starts Friday (7/22/16) and runs while supplies last.

     

    ~The Team At Nail Gun Depot

    Read More
  • How To Clear A Nail Jam From Your Framing Nail Gun

    If you own a nail gun (or staple gun), it's inevitable that you'll eventually have to clear a jam from your magazine. Not to worry, with a few simple steps you can have your tool up and running again - without the down time and expense of taking it in for service.

    Nail Gun Nose

    Here's what you have to do:

    1. Depending on the framing nailer you have, you may need to access the tool's magazine. To do this, you will need to consult your manufacturer's owner manual for guidance, as this step may vary based on the model of tool you have. For example, some Senco FramePro stick nailers feature rear magazine mounting screws, which might need removal to allow proper access.
    2. To get to the jam, you'll need to first pull the magazine track away from the framing nailer's nose.
    3. Then, using a screw driver or hammer (we've also found success using a nail punch), gently strike the driver past the jammed nail. You should now be able to remove the jammed nail(s).
    4. Now, reassemble your magazine, and reinstall any mounting screws or other components altered during Step One.

    Unfortunately, there's a good chance you'll experience a jam or two - even with a top-tier nailer or stapler. To help prevent the issue, only use fasteners that meet the specification of your tool. You should also verify the tool is loaded properly, and always use the manufacturer's recommended air pressure for pneumatic models.

    Still in a jam? Contact Nail Gun Depot's service experts for further advise.

    ~The Team At Nail Gun Depot

    Read More
  • Win Your Nail Gun Depot Wishlist!

    Nail Gun Depot is celebrating its new website with a “Win Your Wishlist Giveaway.” That's right, we're giving away $1,000 toward your Nail Gun Depot wishlist! All you have to do is log in or create an account on Nail Gun Depot, fill out the entry form, and start building your dream wishlist.

    Nail Gun Depot Win Your Wishlist

    We kicked things off July 1st, and will continue through September 30th, 2016 - so there's plenty of time to get your entries in! But, the sooner the better - there's more than the grand prize up for grabs!

    We'll be giving away several small prize packs, as we count down to the grand prize drawing for $1,000.00 in Nail Gun Depot store credit. Our grand prize winner will have the opportunity to purchase items directly from their personalized Nail Gun Depot wishlist.

    Nail Gun Depot Wishlist

    Don't forget, the grand prize drawing will take place on September 30th!

    ~The Team At Nail Gun Depot

    Read More
  • Items 41 to 50 of 155 total

Copyright © 2018 Nail Gun Depot All rights reserved. All trademarks and brands are property of their respective owner