CALL CART ACCOUNT

ITEMS IN CART: 0

$0.00

translate
Tag Archives: screw
  • Repairing Nail Pops - There's No Joke About This Tricky Project

    It might be April Fool's Day, but we aren't joking around with this tricky project, repairing a nail pop. Nail pops occur over time, when a nail begins to separate from the stud it is anchoring drywall to. As the nail begins to work itself out, it eventually applies enough pressure to the spackle or putty above it, to force the putty away from the drywall - eventually exposing the nail's head. Nail pops can be caused by a variety of reasons - from wood beams that swell with humidity to a settling foundation.

    An occasional nail pop is nothing to get excited about, but if you notice other problems such as severe cracking, bulges or discoloration in your walls and ceiling - consult a building inspector to have your home evaluated for a more serious issue. More often than not, a nail pop is caused by the convergence of warm and cold climate(s), which causes wood to swell and contract. They are also more common in older homes, as screws were not a preferred method of drywall fastening 20-30 years ago. Current builders and contractors have the option of using a screw gun, such as Senco's DuraSpin tools, when installing drywall. In the past, nails and nailers were typically used for drywall installation. Because a nail has a smooth body, it doesn't command the same holding power that the tracks on a screw do - making it easier to slip out of position.

    There are a couple ways to repair a nail pop, depending on the arsenal of tools at your disposal. The simpler solution, take a nail punch to the center of a nail pop, and lightly tap it with a hammer. In the unlikely event that a screw has come loose, simply take a screwdriver and tighten. When using the nail punch, sheetrock and drywall will likely chip away if the nail has not completely protruded through yet, so you will have to use spackle to cover the opening; followed by smoothing, sanding and painting.

    A bit more complex, you can also drive a drywall screw into the drywall, along the same stud where the nail has begun to separate. This is a more permanent solution to the problem, as the screw should secure the drywall in place - whereas using a nail punch does not guarantee the issue will not recur if the nail re-separates. Once the screw is in place, scrape any leftover sheetrock or putty away from the original nail gap and spackle over both the nail and screw opening(s). Smooth, sand and paint as necessary.

    Nail pops can be a tricky problem for homeowners, but can be easily repaired with the proper attention. If you don't feel comfortable repairing the issue yourself, consult a handyman or professional to remedy a solution for your nail pop.

     

    Your How To Helpers,

    The Team At Nail Gun Depot

    Read More
  • New Tools, New Year

    Welcome back to the Nail Gun Depot blog, we hope your 2013 holiday season was relaxing and enjoyable. With the holidays over, it's back to work for most of us - so let's take a look at some new tools to help you start 2014 with improved productivity.

    We believe it is important to start the year with growth, as we proudly add a new brand to our lineup of quality tools - welcoming 3 PRO to our products page. 3 PRO offers a rapidly growing line of tools that is catching on fast with contractors and DIYers. We now carry three flooring tools by 3PRO, the FSN50 flooring nailer and staple gun, the S9032P flooring stapler and the S9040P floor stapler. All three of these pneumatic flooring tools are easy to use and provide the end user with a durable, competitively priced product. Consider trying out a 3 PRO flooring tool if you are looking for a less costly solution to floor installation - and don't forget, our selection of fasteners will help you complete any project with ease.

    Continuing with product growth and expansion, check out our recently updated lineup of Senco DuraSpin screws, bits and accessories. Building on our existing inventory of fasteners for Senco's DuraSpin screw guns, we are now able to offer a greater selection of DuraSpin screws and bits than ever before. Senco is recognized for providing top quality tools and fasteners, so rest assured, your project will be built to last - whether you are installing drywall or building a new deck! You can check out our selection of DuraSpin screws here.

    Another exciting development at Nail Gun Depot, look for our ALL-NEW "How-To" page, which is scheduled to launch in early 2014! Our mission at Nail Gun Depot is more than selling tools and fasteners, we want to create an experience for all of our customers - and part of that experience is helping a customer understand how their tool works and projects to use it on. Building a long-term relationship with each of our customers is top priority, which is why we are proud to offer this How-To page as part of our commitment to serving our customer's needs. Learn how your tool works via interactive, manufacturer videos and how-to posts. You can also check out posts that include project ideas, repair tips and tool safety.

    Have an idea for our new "How-To" page? Submit your thoughts to us at sales@nailgundepot.com.

     
    The Team At Nail Gun Depot

    Read More
  • 2 Item(s)

Copyright © 2017 Nail Gun Depot All rights reserved. All trademarks and brands are property of their respective owner