CALL CART ACCOUNT

ITEMS IN CART: 0

$0.00

translate
Tag Archives: Spotnails Stapler
  • How To Get The Most From Your Pneumatic Staple Gun

    Are you learning how to use a pneumatic stapler? Get the most out of your staple gun - find out how right here on the Nail Gun Network, by Nail Gun Depot.
    Let's start with loading the tool. Loading a staple gun can vary from tool to tool; however, the following provides general instruction for loading a typical pneumatic stapler.

    Before you start, it's crucial that you have the proper staples. The type of staple that your tool takes will vary from model to model, and manufacturer to manufacturer. Check your tool's specs or manual if you are confused about the type of staple it takes.You can also search for your tool's staples using the Fastener Finder on NGD.

    Once you have identified the correct staples, you need to load them. Most staple guns come in either a top or bottom loading variation. Medium and heavy wire pneumatic staplers generally load from the top, while most fine wire staplers load from the bottom.

    Before loading, be sure to disconnect the air supply and keep the stapler pointed away from you at all times - as you should for any firing tool.

    For a top loading stapler, pull the magazine follower back until it locks into position. After the follower is locked into position, place the strip of staples over the magazine rail. The staples should move freely, back and forth on the rail. The last step is to unlock the follower and release it - so that it pushes the staples into the nose of the staple gun for firing.

    If you have a bottom load stapler, locate the release first - which is generally found at the rear of magazine. Depress the release and slide the magazine rail away from the nose. Turn the stapler upside down and insert the staples into the channel, towards the nose of the stapler. Make sure the pointed ends of the staples are loaded - so they will fire into your application. After the staples have been loaded, slide the magazine rail back, towards the nose, until it locks into place. Now you are ready to connect your air supply and test fire.

    Staple guns are designed for a variety of applications, from upholstering furniture to decking and siding applications. With more than 200 available options on NGD, we're confident you can find the right stapler to get your project done right.

    Your Source For Staple Gun Knowledge,
    The Team At Nail Gun Depot
    Read More
  • How To Choose The Right Upholstery Stapler

    Remodeling a chair or piece of furniture? If you work with - or are planning to do upholstery work - you will want to find an upholstery stapler that properly suits your needs. To the novice, you will want to select your staple gun based on its specific application. Upholstery staplers are designed for applications that range from industrial use to amateur fabric work. Finding the right one for you can be easy - if you know what to look for.

    For those just getting into upholstering, you will probably want to select your stapler based on the application you are intending to use it for. First, you will need to measure the material you are working with, to determine the gauge (thickness), crown (width) and leg (length) of the staple necessary for your project. Once you know the gauge of staple needed, you can find the appropriate stapler - you will also see that a variety of brands are available to choose from including Senco, BeA, Duo-Fast, Spotnails, Grex and more.

    Depending on the thickness of material, you will probably choose between a 20 gauge or 22 gauge upholstery stapler. Next you will need to decide whether you want a pneumatic (air-powered) tool or an electric tool. If you do not have an air compressor, an electric tool will bypass the need for one - however, pneumatic upholstery staplers are typically less expensive. One of Nail Gun Depot's most popular items, the Duo-Fast EIC-3118 electric upholstery stapler (replaced by Fasco-Maestri 7C-16 3/8" crown electric stapler) eliminates the need for an air compressor - without sacrificing performance.

    Once you have gained some additional experience, you might want to upgrade to a long nose upholstery stapler. The extended nose on these staple guns allows them to reach into tighter spaces. The BeA 71/16-436LN long nose, pneumatic upholstery stapler, is a top of the line tool that comes recommended by many upholsterers - including the writers at ModHomeEc. You can see their review of Nail Gun Depot's stapler selection here. Long nose upholstery staplers are typically used for more skilled projects, projects that require a higher level of intricacy. If you are sticking to small, simple upholstery work, using a regular nose upholstery stapler should yield the necessary results for your project.

     

    Helping You Fabricate Your Next Project,

    The Team At Nail Gun Depot

    Read More
  • 2 Item(s)

Copyright © 2017 Nail Gun Depot All rights reserved. All trademarks and brands are property of their respective owner