CALL CART ACCOUNT

ITEMS IN CART: 0

$0.00

translate
Stanley Bostitch
Stanley Bostitch
  • Quick Tips For Fixing Framing Nailer Jams

    Nothing ties up work faster than a nail gun jam. It's a nuisance that can cut into your work, unnecessarily delaying projects. All nail guns will jam from time to time, no matter the brand, no matter the price. This applies equally to coil and stick framing guns. It's very easy, however, fixing framing nailer jams yourself.

    Read on to learn how to clear a fastener jam—and what causes a jam in the first place—so you can prevent them. Also, be sure to watch our helpful videos on the Nail Gun Depot YouTube Channel.

    Using a Hitachi NR83A5(S). This worker surely knows how to fix a framing nailer jam

    Clear An Impulse Framing Nailer Jam (also works for paper tape nail guns)

    One of our most popular tools is the Paslode CF325XP Cordless Framing Nailer, originally the Paslode Impulse framing gun. Because it is such a common tool, we get a lot of calls asking how to fix fastener jams. Well, it’s simple to do it yourself, whether on this or another brand of paper strip framing nailer. 

    Learn how to fix a framing nailer jam in a Paslode XP Cordless Framing Nailer

    1. Disconnect the power supply. For a cordless nailer, remove the battery and fuel cell. For a pneumatic nailer, disconnect the air hose.

    2. Remove the fasteners. You don’t want any flying out when you remove the stuck nail from the magazine.

    3. Using an Allen wrench, loosen the two screws underneath the depth adjustment.

    4. Using a screwdriver, gently separate the magazine assembly from the nose assembly. You’ll notice the driver blade is stuck with the offending nail behind it.

    5. Using the screwdriver again, push the driver blade down. If there’s a really tight jam, tap the driver blade down with a nail set. Pushing the driver blade down should help clear out the jam.

    6. Tighten the Allen screws back up, and you're ready to go.

    What Caused the Jam:

    Tape Collation Fail: The fasteners have been mishandled, or the paper tape has gotten wet. Nails will no longer line up properly.

    Slamming the Follower: This can also throw off the nail collation. Use enough force to close the follower, but don’t slam it shut.

    Incorrect Loading: Nails have been put into the magazine backward.

    Wrong Fastener Collation: If the nailer calls for a 34-degree paper collated nail strip, for instance, don’t try to use a 28-degree wire collated nail strip. Use the angle and collation directed by the tool manufacturer.

    Learn how to fix a framing nailer jam in a Metabo HPT/Hitachi NV83A5 Coil Framing Nailer

    Clear a Coil Nailer Jam

    Another fan-favorite framing nail gun is the Metabo HPT NV83A5 Coil Framing Nailer, previously known as Hitachi brand. Here's how easy it is fixing framing nailer jams in your coil nail gun.

    1. Disconnect the air supply.

    2. Remove the fasteners.

    3. Push the driver blade down by tapping it with a nail set and a hammer. If you’ve got an old driver blade on hand, you can also use that to push the current driver blade down.

    4. Make sure the driver blade is all the way down and remove the stuck fastener completely from the nose of the tool.

    5. Reload nails and reattach air supply.

    What Caused the Jam:

    Lack of Adequate Oil: The air cylinder in the nose needs plenty of oil to function properly. Too little oil, and the nails will be slow to feed, causing a jam. Pro Tip: For coil nailers, use 10-15 drops of oil before nailing.

    Misshapen Coil: A coil has to be round to feed properly. If the roll has become misshapen from being dropped or squeezed, you can try to re-form it. In some cases though, you just have to start over with a new coil.

    Wrong Fastener Type: Be sure the nail's shank diameter and collation match the tool's specified usage. Otherwise, the nails will not fit or feed properly in the tool. This is why many manufacturers have a coil nailer specifically designed for use with roofing nails, versus siding nails, versus framing nails.

     


     

    Shop Nail Gun Depot:

    Framing Nailers

    Framing Gun Nails

    Read More
  • Cordless Nailers: Comparing Gas- and Battery-Powered Nail Guns

    There’s no question that cordless nailers have come a long way from the late 1980's, when Paslode introduced the first cordless framing gun. Despite technology advancements in almost every facet of the industry, there's still one dividing line in cordless nailing—compressed gas fuel combined with a battery—or battery-only power. Two very similar concepts with very different means for operation. Understand the differences before you buy.

    An example of gas-powered cordless nailers, the Paslode CF325XP Framing Nailer

    Gas-Powered Cordless Nail Guns

    Also known as fuel-powered or gas-cartridge nail guns, gas-powered nailers rely on combustion. These types of nailers were designed to mimic pneumatic nail guns, by using compressed gas fuel in combination with a battery.

    To shoot a fastener, you press the tool nose against the work surface, fuel goes into the combustion chamber, and mixes with air from the tool’s fan. When you pull the trigger on this type of nail gun, a spark plug near the battery lights the gas-air mixture. The combination of fuel and air forces the piston and the driver blade downward, which fires the fasteners.

    The first tool of this kind was invented by Paslode. They introduced the Impulse model in the late 1980s, and the technology behind it is still in use today. You can see this kind of system in several different nailers, including the Paslode CF325XP cordless framing nailer and the Grex GC1850 brad nailer, for example.

    As you might imagine, it requires more energy to drive a framing nail than it takes to sink a brad. This translates to the size of battery and fuel cell your tool may require. For instance, the Grex cordless brad nailer uses two AAA batteries to ignite its small, cylindrical finish fuel cell.

    An example of battery-powered cordless nailers, the Bostitch BCN680D1

    Battery-Powered Cordless Nail Guns

    In recent years, there's been a push to eliminate the gas fuel cell, and use a more powerful battery as the nailer's sole source for power. The battery powers a spinning flywheel, which drives the motor. As long as the trigger is pressed, the flywheel stays in motion, which allows for rapid or bump firing.  With the Bostitch BCN680D1 18-gauge brad nailer, for example, a 20V Li-Ion battery alone powers the tool.

    New innovations strive to make battery-powered tools increasingly lighter and more agile. Some battery-powered nailers even utilize similar design elements comparable to an air-powered nailer, to power the tool. The Senco Fusion finish nailer, for example, uses a permanently sealed air cylinder, which stores energy as compressed air. This type of nail gun works similarly to a pneumatic, but without the need for fuel, instead using the battery to do the heavy lifting.

    Bostitch claims that by switching to an all-battery-powered model, pneumatic tool users save up to 20 minutes a day in setup. They also state that gas-powered tool users can save up to $15 per week in fuel cells and cleaning/lubricating costs. That's something to take into consideration when high-volume production is a requirement.

    Associated Costs of Cordless Nailers

    Let’s look at an important aspect of comparison—cost. A lithium-ion battery will cost around $100, and a battery charger will run you about $50. If the tool comes without a battery, you’ll need to get one. Having at least one backup battery is highly recommended too.

    One thing many people fail to consider when purchasing a tool is the continued cost of ownership. Batteries have a limited lifespan, so eventually those will need replacing. A battery for a cordless tool will last approximately 3 years or 1,000 charge cycles. 

    For gas-powered nailers, expect to pay about $13 to $15 for a single fuel cell. While fuel cell life can differ depending upon size and application of the tool, most deliver 1,000 to 1,300 shots. Metabo HPT estimates that, for skid of 200,000 nails, you'll need about 200 fuel cells. That comes out to approximately $1,796.

    Example of gas-powered cordless nailers, an Aerosmith Track Pinner In Use

    Convenience of Cordless Nailers

    The obvious benefit of owning cordless nailers is that you don’t have to worry about getting a compressor or being tied to an outlet. That also eliminates a safety hazard in potentially tripping over air hoses or cords. There’s also no need to worry about choosing the fittings or hoses (or even tool oil) to work with your tool, so you can leave those out of the equation.

    A battery-only powered cordless nailer means a single power source, which is one less thing to worry about. The downside of course is that the tool's sole reliance on it will drain the battery quicker, unlike with a gas-and-battery-powered nailer. So, you should plan to keep at least one spare battery on hand at all times. Also, a large battery means added tool weight. If you’re working at challenging angles, such as overhead, you'll notice it.

    One other thing to consider, a gas-powered nailer can typically run longer than a 100% battery-powered model, since it has two sources of energy working together. For a quick overview, here are some of the pros and cons between both types of cordless nailer.

    Gas-Powered Nailer Pros/Cons:

    Pro: Gas-powered cordless nailers tend to run longer between re-charging than their all-battery-powered counterparts.

    Con: You need two accessories (battery and fuel cell) to power the tool. Some people also find the odor of gas tools annoying, though some brands like Grex now offer odorless fuel.

    Battery-Powered Nailer Pros/Cons:

    Pro: Battery-only nailers eliminate the costs associated with gas fuel cells. Simply charge up and start working. Most battery-only nailers also eliminate the aggravating "ramp-up" time required by gas-powered tools, which equates to time saved.

    Cons: Battery-only nailers typically have a larger battery pack, since the tool is running exclusively on the energy generated by the battery. This allows them to go longer between charging, but adds weight to the tool. Some systems, such as Metabo HPT's MultiVolt, allow the user to switch between an electric power cord and battery.

    Which type of cordless nailer do you prefer? Let us know in the comments. Questions? Contact Customer Service.


     

    Shop Cordless Nail Guns at Nail Gun Depot

     

    Read More
  • 6 Tips: Preserving Tool Battery Power in Cold Weather

    Cordless tools are more common than ever these days, and what’s more, they keep improving as manufacturers continue to innovate. You’ve probably noticed that Lithium-Ion battery power has surpassed NiCad (nickel-cadmium) and NiMH (nickel metal hydride) in cordless tools—and nearly everything else we use. But in cold weather, Li-Ion batteries seem to lose steam. We'll help you preserve power in your cordless tool battery with 6 easy tips.

    Dewalt DCN693M1Li-Ion Cordless Metal Connector Nailer at Nail Gun Depot

    Benefits of Lithium-Ion Batteries

    Lithium-ion batteries have many benefits over their predecessors; they store a larger amount of electricity, have a lower rate of self-discharge, and are more compact/weigh less than other rechargeable batteries. These cordless tool batteries aren’t delicate flowers, but they do have more basic requirements for maintaining optimal performance. You may have noticed, for instance, that your Li-Ion-powered tool is a little less forgiving in colder weather.

    Batteries are a collection of chemicals and other materials assembled to create a reaction that will then power your tool. And chemicals inside of them can be impacted by extreme situational changes. On the plus side, if you can call it that, Li-Ion is more stressed by extreme heat than extreme cold. Protection circuitry mainly prevents over-heating. but It's up to you to prevent over-cooling.

    Here’s a fact: When the temp dips below 40°F, Li-Ion batteries don’t fully hold a charge. And trying to charge them at that temperature can permanently affect run-time. So, what to do?

    Preserving battery power, as in a Senco Lithium Ion 18 V Battery

    How to Preserve a Li-Ion Tool Battery in Cold Weather:

    1. Store (and charge) batteries within the temperature range recommended by the tool manufacturer. While you can discharge a tool battery in extreme cold, charging it in freezing temps (32°F or colder) is a no-no. You may not see the damage, that doesn’t mean it’s not happening inside the battery.

    2. If a Li-Ion battery has fallen below 40°F, place it in a room-temperature area for an hour or two and let it warm up. What is room temperature? About 72°F, give or take a few digits.

    3. Optimal temps aren’t always available job sites. When not using the Li-Ion tool battery in cold weather, remove it and place in a pants pocket to transfer some body heat to the battery. Another option is to use a gel warmer in the tool bag while it’s in the work car/truck.

    4. Don’t let a Li-Ion battery completely discharge before re-charging it. Unlike older battery types, Li-Ion doesn’t need to be completely drained/re-charged. Li-Ion batteries suffer from little to no “memory effect,” or low-charge capacity when continually charged from a partially charged state.

    5. Once you start to feel power lagging, swap out the battery with a spare and recharge the first one. Having a few spare batteries on hand will keep you powered up. Yes, you should have a spare battery. And yes, we sell those at Nail Gun Depot.

    6. When it’s time to store the battery for an extended period, leave 40% to 50% life in it. This helps keep it stable and keeps the circuit protection operational. Store the battery in a cool (40°F to 60°F), dry area on a plastic or wood (not metal) shelf. 


     

    Shop Cordless Tools

    cordless nailerscordless staplers and accessories, and cordless screw guns

    Shop Batteries

    Metabo HPT (Hitachi) batteries, Dewalt batteries, Senco batteries, and Bostitch batteries

    Read More
  • 10 Tips For Air Tool Safety

    Almost everyone who works in construction has a horror story that involves a power tool. You may have read our January 2014 blog post about a carpenter who accidentally fired a framing nail into his heart. Luckily, he survived the incident, but not without becoming a cautionary tale in Vice magazine.

    According to OSHA, nail gun accidents alone account for tens of thousands of serious injuries each year, and they account for more construction-related injuries than any other power tool. And those are only the reported ones.

    Just because you’re working on a weekend project, or using a lightweight power tool, doesn’t reduce the risk for injury.

    Nail Gun Safety

    Before You Pull the Trigger

    What are the best ways to prevent air tool accidents? Job one is to READ THE INSTRUCTIONS. In fact, you should do so before even firing the tool, which we admit is hard to do when a brand new air gun is burning a hole in your tool bag.

    You’ll notice the larger part of a tool’s manual is comprised of warnings; exclamation points in rounded triangles, circles with diagonal slashes through them and occasionally curious illustrations. You’ll see “no horseplay” a lot in user manuals. The warnings are easy to gloss over, but heed them. A power tool mishap can simply ruin your day, or it can shorten your career. Before becoming a statistic, familiarize yourself with the following safety tips.

    Senco Safety

    10 safety tips to follow when using an air tool:

    1. Read the manual.
    2. Wear protective gear, including safety glasses, shoes, gloves, hard hat, face shield, ear plugs, and whatever else the task requires.
    3. Use the right fasteners for the tool. This can prevent damage to the tool as well as accidents down the line.
    4. Maintain your tool, hoses, and compressor. Occasionally inspect tools for damage, replace worn parts and use air tool oil, if need be. RolAir has some great tips for maintaining an air compressor.
    5. Store tools in a dry place and clear off any debris after using. Moisture, dust and fumes can damage tools. Read our blog on How To Avoid Destroying Your Pneumatic Nailer for more information.
    6. Keep a clean work area to avoid tripping and combustion. NEVER blast away debris from a workspace or from skin using a compressor. It can propel metal particles, fragments or chips. Air driven under the skin can cause an embolism. If you clean an object with a compressor, OSHA has specific regulations for protective gear, chip guarding and air pressure (below 30 PSI).
    7. Always use the correct air pressure required for the tool. Check the user manual for guidelines, or learn more about PSI here.
    8. Opt for Sequential over Contact fire. Reserve rapid bump firing for high-volume, high-speed applications. See our video on safe trigger use. Also, respect the rebound. After driving a fastener, allow the tool to recover before for making contact with the surface again.
    9. Keep your finger OFF the trigger until you’re ready to drive a fastener. Always refrain from pointing a tool at anyone.
    10. Turn your tools off when not in use. That includes air nailers, staple guns, air compressors, etc.

    Construction Safety

    Besides ensuring your tool is in working condition, make sure you are, too. Don’t overreach, and avoid alcohol or other substances that can cloud judgment or impair movement. Want to see more? Our friends at Senco have even more great safety tips for using power tools.

     

    ~ The Nail Gun Depot Team

    Read More
  • Cost-Efficient, High-Quality Tools For 2017 Holiday Gifting

    The holidays are here, and Nail Gun Depot wants to make sure you’re giving a gift that will stay productive well beyond the holiday season. Check out our top picks for cost-efficient (quality-assured) tools and accessories for the holidays:

    First on the list, the Fasco-Maestri 7C-16 3/8” Crown Electric Stapler is great for everything upholstery. This 100% electric fine wire stapler, designed with super durable reinforced fiberglass, is ideal for any picture frame construction, decorative trim, upholstery, carpeting, furniture repair, cable sheathing, and many more projects. Pairing maximum power with high fastening speed, you’ll have no trouble getting the most from any project.

    Pairing nicely with the Fasco-Maestri electric stapler, the Spotnails P-97482 Heavy-Duty Upholstery Staple Remover does a great job removing fine wire upholstery staples. The perfect accessory for anyone working with upholstery, Spotnails’ staple remover is designed specifically to reduce the risk of snagging fabric. Its compact size and price also make for a great stocking stuffer.

    Back by popular demand, for finish and trim woodworkers, grab a Grex Holiday Bundle:

    Grex is offering several holiday gift sets this year. The first, a Grex P635 23 Gauge Headless Pinner Holiday Gift Set, for $148, includes a P635 headless pin nailer plus a FREE FT230.1 edge guide – a $70 value, but only available through Christmas! Give the gift of green, and still have some left in your wallet too. The Grex P635 pin nailer is lightweight, powerful, and has an industrial strength design for added durability. It’s the perfect reliable tool for light wood assembly, finish work, decorative trim, and craft work, among other projects.

    Grex Holiday Bundles

    The second set, a Grex 1850GB 18 Gauge Brad Nailer Holiday Gift Set, is $168 (until Christmas), and includes a 1850GB 18 gauge brad nailer and FREE FT230.1 edge guide. If you’re shopping for someone who loves projects working with trim and moldings, cabinet and light wood assembly, window beading, or jig fixtures, you can’t beat this special holiday bundle. This Grex “Green Buddy” features an extremely slim nose for extra precision in tight-to-reach areas.

    We’re also offering a Grex P650L Headless Pinner Holiday Gift Set. Currently listed at $248 for the 2017 holiday season, you get a P650L headless pin nailer and FREE FT230.1 edge guide, with savings added up to $70. This Grex bundle is an excellent gift for anyone who works with light wood assembly, rattan furniture, craft work, or mirror and picture frame assembly. For the little details, Grex’s FT230.1 edge guide allows for even greater precision on the job.

    Gifting for the level-headed? Stabila is offering a couple “Best of Three” bundles – great for anyone’s workshop:

    The first, a Stabila 48370 Classic Set, includes a 37448 48” type 196 spirit level, a 37424 24” type 196 spirit level, a 25100 torpedo level, and a carrying case. Built for quality and durability, and featuring a limited-time only price of $199.99, this deal is a steal. Made in Germany, these levels house crystal clear vials that will never leak, break, fog, or need recalibration. In fact, the vials are guaranteed for life. Talk about a gift that will last a lifetime.

    Stabila Level Bundles

    Stabila is also offering a 48380 Type 96M Magnetic Level Set. This set includes one 38648 48” type 96M magnetic level, one 38624 24” type 96M magnetic level, a 25100 diecast magnetic torpedo level, and a carrying case. As the name implies, every level in this set is magnetic – ideal for jobs that require hands-free work with metal. If you’re looking for a new level set for the holidays, don’t pass this deal up!

    For pneumatic fanatics, we have a couple awesome bundles to consider:

    Our Senco PC1342 23 Gauge Micro Pinner Kit includes an 8F0001N FinishPro 23SXP 23 gauge headless pin nailer, and a PC1010N air compressor. This deal, for the 2017 holidays, is still in stock at $229. The Senco FinishPro pinner is ideally suited for any intricate, light finish wood work and wood assembly. Powerful and precise with an ultra-narrow nose, this tool doesn’t split wood. The perfect mate, Senco’s PC1010N air compressor uses an oil-free pump and induction motor, cutting back on noise and reducing maintenance.

    Cadex Bundle

    Receiving an honorable mention this year, Cadex has the ultimate finish and trim bundle, exclusive only to Nail Gun Depot. Our Cadex V2/BUNDLE, which includes both 21 and 23 gauge Cadex pin nailers, an air compressor, 75’ air hose and sample pin pack. Priced at $599 with free shipping included, this package deal is only here until supplies run out.

    MAX out the volume with a new Bluetooth speaker:

    MAX USA Tools is making some noise, and while supplies last, you can too. For a limited-time, get a FREE Bluetooth speaker with ANY MAX framing nailer. This deal includes top-selling models like the SN883RH3 Full Round Head Framing Nailer and SN890CH3/34 Clipped Head Framing Nailer, among others. For roofers, and siding installers, we’re including a FREE tool bucket bag with purchase of ANY MAX roofing or siding nailer – while supplies last.

    Max Speaker Tool Deal

    And finally, for the high tech woodworker on a budget, it’s time to cut the cord:

    The Hitachi NT1850DE Li-Ion 18 Gauge Cordless Brad Nailer is a fantastic gift for those who don’t want the hassle of hoses and cords. Equipped with brushless motor technology – this Hitachi brad nailer delivers increased power at reduced weight, a longer tool life, and longer run time per charge compared to most competing cordless brad nailers. As a special holiday bonus, while supply lasts, Hitachi is including a FREE spare battery with this tool!

    Hitachi Cordless Promo

    One more tough-as-nails cordless, battery-only nailer in our holiday line-up, take a look at the new Bostitch BCN680D1 20V MAX 18 Gauge Brad Nailer Kit. Priced just under $299 for the holidays, this brad nailer pairs Bostitch brand quality with the latest cordless technology. Certain to bring cheer Christmas day and beyond.

    Be sure to note, our shipping experts recommend ordering no later than December 14, 2017 for delivery before Christmas.

    Which gift on this list would make you merry?

     

    ~ The Nail Gun Depot Team

    Read More
  • Bostitch Charges Up For Cordless Nailing

    Bostitch has something new, and they’re pretty “amped” up about it. For a brand that’s had its share of gas-powered cordless construction tools over the years, Stanley Bostitch has finally adopted the latest – and greatest – in cordless nailing technology. For the first time, they’ve brought lithium ion power to their nail guns. Here’s your first look at their new lineup:

    •    Bostitch BCF28WWM1 20V MAX 28 Degree Wire Weld Framing Nailer Kit

    The Bostitch BCF28WWM1 is one of two new framing nailer kits from the brand. Powered by a 20V high-capacity 4.0Ah Li-Ion battery, and delivering enough power to drive 28 degree wire strip framing nails, this cordless framing gun is ready for everything. Its battery, in tandem with a brushless motor, allows the BCF28WWM1 to run cooler; improving efficiency and reducing wear and tear. Tool-free depth adjustment allows for precision nail placement, making this Bostitch nailer perfect for framing, sheathing, fencing, deck building and other similar applications. Easily adjust between bump and sequential firing modes with the BCF28WWM1; and rest assured that jam clearance is a breeze. The BCF28WWM1 kit comes complete with a BCF204 Li-Ion battery, BCB115 charger and kit storage bag. As with the other cordless nailers below, Bostitch offers a three-year limited warranty on the tool.

    bcf28wwm1

    •    Bostitch BCF30PTM1 20V MAX 30 Degree Paper Tape Framing Nailer Kit

    The second of two new cordless framing nailer kits, the Bostitch BCF30PTM1 remains nearly identical to its counterpart, the BCF28WWM1. Besides accepting paper collated framing nails, the versatile BCF30PTM1 too comes with a BCF204 4.0Ah high-capacity Li-Ion battery, BCB115 charger and kit bag. Feeling déjà vu? Compare this Bostitch paper strip framing nailer to the Dewalt DCN692M1 cordless framing nailer kit.

    bcf30ptm1

    •    Bostitch BCN680D1 20V MAX 18 Gauge Brad Nailer Kit

    In addition to the framing guns, Bostitch’s new line-up also includes several smaller body finish guns, including a brad nailer kit – the BCN680D1. The 2.0Ah Li-Ion battery, included in the kit, powers a brushless motor in the BCN680, driving 18 gauge brad nails from 5/8” to 2-1/8” in length. Easily countersink nails for tasks installing decorative moldings, door and window casing, staircases and shoe molding – among other projects in finish and trim woodworking. The BCN680D1 also has some serious accuracy, thanks to the brad nailer’s micro nose. Meanwhile, to prevent dry-fire and unwanted surface markings, the BCN680D1 features low-nail lockout. Standard features include a tool-free stall release and tool-free jam release, selectable actuation modes, multifunctional LED lights, and an adjustable belt hook. With the kit, you’ll find a BCB203 battery, BCB115 charger and storage bag. Save time and money with this battery-only lithium ion brad nailer, when compared to the recurring expense of gas fuel canisters – not to mention the ramp up time required during use.

    bcn680d1

    •    Bostitch BCN662D1 20V MAX 16 Gauge Straight Finish Nailer Kit

    Last, but not least, Bostitch plugged two new cordless finish nailers into their lineup. We’ll start with the BCN662D1, their 16 gauge battery-only model. The Bostitch BCN662D1 is identical in every way to its 15 gauge BCN650D1 counterpart, with one exception, the tool runs 16 gauge straight finish nails instead. The BCN662D1 cordless finish nailer kit comes with BCB203 2.0Ah high-capacity Li-Ion battery, BCB115 battery charger and kit bag for storage.

    bcn662d1

    •    Bostitch BCN650D1 20V MAX 15 Gauge Angled Finish Nailer Kit

    Likewise, the BCN650D1 ditches the need for air compressors, air hoses and fuel cells – running exclusively on battery power. Drive 15 gauge “FN” angled finish nails from 1-1/4” to 2-1/2” with ease. A micro nose frees the user’s line of sight, ensuring precision nailing with every drive. Meanwhile, an inline magazine, set at 25 degrees, allows the user to get into tight spaces; all while the BCN650’s brushless motor keeps the tool running smooth. Quickly switching between bump and sequential firing modes is no hassle either. We find this 15 gauge Bostitch cordless finish nailer excels when used for applications including crown molding, baseboards, hardwood flooring, door and window casing, and more. Other standard features of the BCN650D1 include tool-free depth adjustment, a no-mar pad, multifunctional LED lights (indicating battery life, stalls, and work space illumination), and an adjustable belt hook. Along with a three-year limited warranty, this Bostitch finish nailer kit comes with BCB203 2.0Ah Li-Ion battery, BCB115 charger and bag.

    bcn650d1

    Stanley Bostitch is offering most of these kits in limited-quantities during launch. Look for regular availability sometime around Thanksgiving 2017. Pricing varies depending on the model, and can be found on Nail Gun Depot. Just like Dewalt, look for bare, tool-only models to follow shortly after.

    With the introduction of these impressive cordless nailers from Bostitch, it leaves us wondering, which will be the right one for you?

     

    ~ The Nail Gun Depot Team

    Read More
  • Top 5 Woodworking Gifts For Father's Day 2017

    Having a hard time shopping for Dad? Skip the macaroni art and surprise him with a gift he can actually use. Priced for budgets of all sizes, take a look at our Top 5 Woodworking Gifts For Father's Day 2017.

    Small budget? Shopping for the Dad that has it all? Consider an accessory or attachment for the tool(s) he has already. If he prefers to use air-powered tools, consider a new air hose. With prices ranging from $29 to $100+, there are plenty of options to choose from. For the tech savvy Dad, going cordless, consider a spare battery for his cordless nailer or stapler.

    If shopping with a slightly larger budget, consider getting Dad a complete cordless kit. Thanks to Hitachi, from now through July 31, 2017, you can get a FREE DS18DSAL cordless drill kit via mail-in form, when purchasing any of Hitachi's all-new Li-Ion cordless finish nailers (models include NT1850DE, NT1865DM, and NT1865DMA). Even better, we're throwing in an additional spare Li-Ion nailer battery instantly with participating tool purchase. Free mail-in drill kit includes DS18DSAL cordless driver drill, Li-Ion cordless LED job light, 2 Li-Ion batteries, and battery charging base. All-in, Dad will get 4 Hitachi Li-Ion batteries, a cordless drill, LED work light - and of course, the Hitachi cordless nailer. Whether you split this kit up, keep part for yourself, or give him the full package, Dad won't find a deal like this anywhere else.

    Hitachi Cordless Nailer Sale

    Maybe finish woodwork isn't Dad's thing? If he's into heavy carpentry, consider a framing nailer for Dad. For a limited-time, Nail Gun Depot is offering the Dewalt DCN692M1 at its lowest price yet - while supplies last. You can also check out our full catalog of framing nail guns here.

    Dewalt DCN692M1 Framing Nailer

    Dad stocked up on fastening tools? A "must-have" in every woodshop, make sure Dad has an accurate measuring level. With options ranging from $10 to $1,000+, Stabila offers premium quality construction levels and laser levels - ensuring Dad the precision his projects demand. Choose from a wide variety of levels and lasers, including a full selection of spirit levels, mason levels, magnetic levels, plate levels, pocket levels, torpedo levels, exact length levels, electronic levels and more.

    Stabila Tech Level

    Last, but certainly not least, for the Dad that's getting started in woodworking, consider a tool and air compressor combo kit, such as the Senco PC0947 brad nailer and compressor combo set, or the Bostitch BTFP72646 3-tool finish kit with air compressor. The beauty to combo kits, such as these? They include everything Dad will need, to get started with woodworking. Simply plug in the compressor, hook up the tool, and he's ready to go.

    A Father's Day gift to all, use promo code FIVEOFF during checkout to receive 5% off your entire order!

    Wishing A Happy Father's Day To You & Yours,
    The Nail Gun Depot Team

    Read More
  • Top 5 Essential Air Compressor Accessories

    Using an air compressor to operate any air-powered nailer, stapler, or other pneumatic tool is common knowledge, but many don't realize it's not simply the air compressor that brings their pneumatic tool(s) to life. Get the most out of any air tool with these top five essential air compressor accessories.

    Senco Air Accessories

    1. Air Hose

     

    Available in 1/4 inch and 3/8 inch inside diameters, the air hose is not only our most common accessory on this list - but also the most crucial. RolAir recommends using a 3/8 inch air hose whenever possible, as it allows for optimal air flow - despite being slightly less nimble versus a comparable 1/4 inch air hose.

    Air hoses come in a variety of lengths and materials. Typically found in 25 foot increments, make sure your air hose is long enough to reach the distance required. For a workshop or garage, 50 feet may suffice - whereas a roofer or framer may require 100+ feet of air hose while on the job.

    When it comes to selecting the best air hose material, it really depends on the type of environment the hose will be used. Options for air hoses include rubber,  polyurethane, or a rubber and polyurethane blend (commonly referred to as a "Hybrid Hose"). Rubber material handles temperature change well, but for more intense use, contractors generally prefer polyurethane air hoses, which also do well in extreme temperatures (warm and cold), but offer added flexibility with less risk of damage. Polyurethane has been found to stand up better to cuts and kinks too. Hybrid air hoses offer added durability, but at a more desirable price point as compared to traditional polyurethane air hoses.

    You can learn more on what type of air hose you need, by clicking here.

     

    2. Oils & Lubricants

     

    Most new air compressors that are not oil-free come with a fresh reservoir of oil, but once that oil has reached the extent of its lifespan, you'll need to make sure the compressor pump is properly lubricated.

    Before you start, make sure your compressor is not an oil-free model. Assuming it requires oil, prior to daily operation, make a habit of checking the air compressor's oil level for the compressor pump and engine (if compressor is gas-powered). Every direct-drive, hand-carry air compressor has a dipstick to check and maintain the proper oil level. RolAir belt-driven air compressors are equipped with a sight gauge to make the task of checking oil levels easier. Always maintain the oil level to read 2/3 full on the sight gauge.

    As a general rule, RolAir recommends changing air compressor oil once a month - though depending on usage this interval may change. If measuring based on hours, 10WT and 30WT compressor oil should be changed every 200-400 hours, while semi-synthetic air compressor oil can go 1,000 to 2,000 hours, and full synthetic compressor oil can run 2,000 to 4,000 hours between changing. Always use oil specified for use with air compressors, ONLY.

     

    3. Air Hose Fittings

     

    Thanks to their size, air hose fittings are probably the easiest air compressor accessory to forget; but while the fittings may be small, their purpose is significant. Depending on your set-up, you'll be able to choose between connectors, couplers, elbows, manifolds, splicers and more. Most of the fittings on Nail Gun Depot are anodized, which means they are resistant to rust and corrosion. Simply learn the proper size fitting for your air tool configuration before shopping.

     

    4. Air Regulators, Filters & Lubricators

     

    The following three air compressor accessories aren't necessarily mandatory, but can improve operation in many ways. Air regulators are pretty straightforward in their purpose - to regulate air flow. Filters help to keep the compressor motor running more efficiently, by removing unwanted moisture and debris from compressed air; however, if filters are allowed to get clogged, they actually lead to adverse results - reducing the compressor's lifespan and performance. The lubricator helps to ensure a long, trouble-free service life, lubricating the entire compressed air system and eliminating the need to add oil to each tool individually, in some instances.

     

    5. Air Compressor Expansion Tank

     

    Need more air than your air compressor's built-in storage tank can hold? You'll probably need to invest in an air expansion tank for your compressor. Compressor expansion tanks are available in a variety of shapes and sizes, and are designed to hold a surplus of air - providing added pressure and performance between your compressor and pneumatic tool(s). Try to find an air reserve tank that is certified by the American Society of Mechanical Engineers (ASME), ensuring compliance with the laws and regulations of the United States.

    rolair compressor at jobsite

    Have a question about what you need for your air tool - air compressor configuration? Send us a message, or check out this Nail Gun Network exclusive video on "How To Connect An Air Compressor Hose."

     

    ~ The Nail Gun Depot Team 

    Read More

Items 1 to 10 of 45 total

  1. PREVIOUS
  2. Page
  3. 1
  4. 2
  5. 3
  6. 4
  7. 5
  8. of 5
Copyright © 2019 Nail Gun Depot All rights reserved. All trademarks and brands are property of their respective owner | Privacy Policy