CALL CART ACCOUNT

ITEMS IN CART: 0

$0.00

translate
Tag Archives: air leak
  • Troubleshooting Air Leaks On A Pneumatic Tool

    Have you ever tried firing a pneumatic nailer, only to hear air leak when pulling the trigger? If so, you're not alone. Over time, wear and tear will take its toll on any air tool, regardless of the brand. The best way to prevent an issue on the job, practice preventative maintenance. Keeping pneumatic tools properly lubricated with air tool oil, as well as cleaning them regularly will help prevent wear. Storing tools in plastic helps to keep dust and other elements out - especially when sitting for extended periods of time.
    But what about the unavoidable issues, like an occasional air leak?
    If you try to fire a pneumatic nail gun or stapler, but only hear air leaking when engaging the trigger, it's likely that your tool's "O-Ring" is not sealing properly. When the trigger is not depressed, you may not hear air leaking, as the valve is probably sealed. However, once you engage the trigger, the valve looses its seal, therefore creating a gap for the escaping air you hear coming from your air compressor, as it flows into the tool.
    On a properly working pneumatic tool, when air is forced into the firing valve, this pushes the valve upward, which opens the main cylinder sleeve and allows the air to drive a fastener. If the "O-Ring" fails to seal, the air will escape, creating your leak.
    While this may seem to be a complex repair, don't get rid of your tool just yet - fixing the issue may be easier than you think. Simply stretch the "O-Ring" on the firing valve and apply grease. This should take care of the issue - helping your air tool run properly. Keeping a tool's "O-Ring" lubricated will increase the ring's lifespan, and prevent drying out.
    We must note, this is not the only cause for a pneumatic nailer or stapler to leak air, just a common source when troubleshooting a leak.
    Always remember to stop using your air-powered tool - or any tool - when it is not functioning properly. Take your tool to a certified repair technician or complete any necessary adjustments yourself, before using the tool again. Failure to take the necessary preventative measures can result in injury, or can lead to further damaging of your tool.
    You may want to learn more about choosing the right air compressor for your application. An under-powered compressor can also lead to misfire or weak firing of your pneumatic nailer.
    ~ The Nail Gun Depot Team
    Read More

1 Item(s)

Copyright © 2020 Nail Gun Depot All rights reserved. All trademarks and brands are property of their respective owner | Privacy Policy