CALL CART ACCOUNT

ITEMS IN CART: 0

$0.00

translate
Tag Archives: grex cordless pinner
  • The First-Ever Grex Cordless Pin Nailer

    The most anticipated tool of the year goes to the 23-gauge Grex cordless pin nailer. See the Grex 23-Gauge GCP650 Cordless Pin Nailer here, before it hits store shelves later this month.

    When it arrives, regular pricing will be set around $438.

    Grex GCP650 23 Gauge Cordless Micro Pin Nailer

    More About the Grex GCP650

     

    For woodworkers, a 23-gauge headless pin nailer is THE tool to have. This micro-pinner operates at nearly the same muscle as its pneumatic counterpart, but with cord-free convenience. As you might expect, the nailer is compact and easy on the user at under 4 lbs, but here's the rubthe GCP650's motor capably drives 2" pin nails into solid oak or maple. It's the only cordless nailer in its class that can say that.

    Adapting to different wood densities and nail lengths is no problem, thanks to a power adjustment knob on the tool. A fine, narrow nose makes for precise fastening and a stepped magazine grants access to tight corners. The tool also has a built-in edge guide, so there's less stops to adjust. Considering you can get up to 50,000 shots per charge, that's quite a workout, but one this Grex cordless pin nailer can handle--hardened steel design, excellent balance and an auto-lockout features help extend tool life.

    The GCP650 is also flexible, operating in cold weather and at high-altitudes. Gas-powered operation not only makes the tool flexible, it's also easier on the wallet, costing less to own in the long-term than similar nailers. The 23-gauge micro-pinner runs on just  two AAA batteries and a fuel cell. So, you don't have to worry about outlets, compressors or regular maintenance.

    Bonus: GFC01 fuel cells don't expire and there's no fumes to contend with.

    The GCP650 headless pinner maintains its lightness thanks to "passive heat management." Other reasons to love it: a built-in edge guide, wide fastener window that reveals how many fasteners remain in the magazine, and the quietude factor, with no distracting fan noise. 

    Fast Facts:

    • Tool Weight: 3.75 lbs
    • Fuel Capacity: 1,300 shots/can
    • Battery Type: 2x AAA batteries
    • Battery Capacity: 50,000 shots
    • Max Cycle Rate: 60 shots/min.
    • Fastener Capacity: 100 pins (1 strip)

    Grex based the new GCP650 micro-pinner on their other high-performance tool, the 18-gauge cordless brad nailer (GC1850). Lightweight yet extremely capable, the 23-gauge cordless tool features an all-metal construction (minus the exterior housing) and is perfect for finish and trim work, light wood assembly, dowel and joint pinning, crafts, display and sign work, door and window casing, and cabinetry.

    Grex STAFDA Video with 23 gauge headless micropinner

    Watch a quick video of the Grex GCP650 23-Gauge Pinner from the 2018 STAFDA show.

     

    ~ The Nail Gun Depot Team

    Read More
  • New Fastening Tools At STAFDA 2018!

    While at the STAFDA (Specialty Tool & Fastener) show in balmy Phoenix last week, we got a sneak peek at these sweet new cordless and pneumatic nailers. Check out Nail Gun Depot’s YouTube channel for quick-videos from the show, or read below to see the innovative new products coming from Metabo HPT, Grex, Cadex, Fasco, and other top brands in fastening.

    Fasco America shows off the F70G Cordless Joist Hanger Nailer

    Fasco’s Faster Joist Hanger Nailer

    Fasten metal plates without being “tied down” by air compressor hoses. Fasco’s F70G Cordless Hanger Nailer is fast and powerful, driving two to three nails per second, from 1-1/2” to 2-1/2” in length. Already available at Nail Gun Depot, the joist nailer has a positive placement nose, non-slip grip, and single-shot actuation. Use it for fastening joist hangers, stud plate ties and post bases.

    Fasco F70G Joist Nailer Video

    Grex's Cordless Micro-Pinner

    Certain to stir up interest, the new Grex GCP650 23-gauge cordless pin nailer conveniently runs on a propane cylinder and two AAA batteries. Based on the popularity of its 18 gauge sibling, the GC1850, this Grex 23 gauge cordless should be a hit when it arrives in December. Already trusted for the performance of their corded 23-gauge tools, the cordless micro pinner features durable components, all-metal construction (minus the outside housing) and shoots 2” pin nails.

    Grex 23-Gauge Cordless Pinner Video

    Grex 23 Gauge Cordless Micro Pinner

    Metabo HPT’s Slick A5 PRO Nailers

    Continuously innovating, the brand formerly known as Hitachi Power Tools adds sleek framing and finish nailers to their A5 PRO lineup. Check out the NP50A 23-Gauge Pin Nailer, the NT50A5 2” Brad Nailer, and the NR90AC5 3” Framing Nailer.

    Each nail gun features dry-fire lockout and depth adjust. The 2” brad nailer has an integrated air blower and a “true” dry-fire lockout that lets you use the last nail in the magazine before shutting off, unlike other nailers which cut out with a handful of nails left.

    Metabo HPT A5 PRO Nailers Video

    Metabo Hitachi shows off NT50A5 Pneumatic Nailer

    Cadex’s 7 For 2019

    Cadex has big plans for 2019. Taking the sturdy V3 tool as a foundation, the company, known for precision trim tools, has spawned five different models: two L-series cleat nailers (one with a rolling base), a 20-gauge cleat nailer for thin floorboards (such as bamboo), an 18-gauge cleat nailer, and a 16-gauge brad nailer.

    But wait, there's more! Cadex will also release two cordless nailers, a 16-gauge finish and 18-gauge brad nailer with built-in light, 4 amp battery and no-mar tip. Cadex plans to drop all of the new nailers in early 2019, so stay tuned.

    Cadex Nailer Video

    Cadex Cordless Nailer

    So, which of these new tool(s) are you most interested in? Let us know in the comments!

     

    ~ The Nail Gun Depot Team

    Read More

2 Item(s)

Copyright © 2019 Nail Gun Depot All rights reserved. All trademarks and brands are property of their respective owner | Privacy Policy