# What Are Scrails - And Why Should I Use Them?

> Scrails can be driven using most pneumatic nailers, but offer better holding power than a standard nail. These fasteners are driven at a rate twice as fast as collated screws - and eight times faster

- **URL:** https://www.nailgundepot.com/nail-gun-network/what-are-scrails-and-why-should-i-use-them-blog

---

### January 14, 2014

Have you heard of a scrail? **[Scrails](https://www.nailgundepot.com/scrails)** can be driven using most pneumatic nailers, but offer better holding power than a standard nail. These fasteners are driven at a rate twice as fast as collated screws - and eight times faster than bulk. Available in a variety of collations, heads and coatings, the ease and speed of a scrail increases productivity and saves labor cost.
Relatively new to the fastener market, scrails, manufactured by **[Fasco](https://www.nailgundepot.com/fasco)**, are available in 20-22 degree plastic strip, 30 degree plastic strip, 15 degree wire coil and 15 degree (90 degree) plastic coil. Just as you would with a traditional nail, you will need to stay within the range of fastener that your **[nail gun](https://www.nailgundepot.com/nailers)** works with - visit the tool manufacturer's specs for nail length and diameter.
![Scrails](https://www.nailgundepot.com/media/magefan_blog/blogimages/2015/Scrail2.JPG)

Bulk and collated screws commonly feature a Phillip's or Square drive. Scrails on the other hand, are available with Phillip's, Square, Pozidrive and Torx heads. They are also available in a range of heads including flat, composite, combo trim and more. You can choose between fine, coarse and double threads.

![Scrail Heads](https://www.nailgundepot.com/media/magefan_blog/blogimages/2015/Scrail4.JPG)

Depending on your application, the coating of the scrail is essential. For subfloor, pallet, crating and manufactured housing, a yellow zinc coating is typically recommended. Colored screws for composite lumber are available in brown, cedar, gray and tan. Hot-dipped galvanized coated scrails are recommended for any pressure treated lumber application. If corrosion resistance is required, scrails are also available in 304 and 316 stainless steel.

![Scrail Collation](https://www.nailgundepot.com/media/magefan_blog/blogimages/2015/Scrail3.JPG)

Odd to look at, scrails have become a revolutionary new item within the fastener industry. These handy fasteners can save time and money for contractors and DIYer's alike.

Ready to start using scrails? Feel free to contact a customer service specialist at Nail Gun Depot to ensure you are ordering the correct product for your application.

**~ The Nail Gun Depot Team**

[< PREV New Tools, New Year](https://www.nailgundepot.com/nail-gun-network/nail-gun-network/new-tools-new-year-blog)

[Choosing An Air Compressor For Pneumatic Tools NEXT >](https://www.nailgundepot.com/nail-gun-network/nail-gun-network/choosing-an-air-compressor-for-pneumatic-tools-blog)

---
_Source: [Nail Gun Depot](https://www.nailgundepot.com/)_
_Generated: 2026-10-26T13:23:45.636Z_