Find A Fastener
Depot Parts

Bostitch BTFP72156 FN Smart Point 15 Gauge Angled Finish Nailer, 1-1/4" to 2-1/2"

Box Count
1
SKU
BTFP72156
$209.00
FREE SHIPPING
Bostitch BTFP72156 FN Smart Point 15 Gauge Angled Finish Nailer, 1-1/4" to 2-1/2" BTFP72156
Rating:
73%

Box Count: 1

$209.00
Qty:
In Stock,Subject To Manufacturer Availability This item is shipped directly from the manufacturer to you
Qty:
In Stock,Subject To Manufacturer Availability This item is shipped directly from the manufacturer to you. In the event there is a delay in shipping due to availability, We will contact you via email within one business day of your order being placed.
Free Shipping
Product Overview

The Stanley Bostitch BTFP72156 FN 15 gauge pneumatic, angled finish nailer, is designed with Bostitch's patented Smart Point technology, driving 1-1/4" to 2-1/2" 15 gauge angled finish nails. Smart Point utilizes a special nose that is capable of reaching into tight spaces, improves visibility, and reduces work surface damage by eliminating the need to push against a surface to actuate the tool. Nose is 80% smaller than existing Bostitch nailers. Other features on the BTFP72156 angled finish nailer include oil-free operation, front and side bumpers, tool-free jam release, selectable trigger, rear exhaust, air blower, dial-a-depth control and a tool-free adjustable belt hook. Tool includes carrying case, sample fasteners, 1/4" fitting, 3 no-mar tips, belt hook and pencil sharpener. The BTFP72156 also comes with Bostitch's seven-year limited warranty. This 15 gauge angled finish nailer is perfect for crown molding, baseboard, cabinets, chair rails, wood furniture, decorative trim, millwork, caskets, hardwood flooring, furniture and paneling.

WARNING: California residents, this item qualifies for Proposition 65 legislation.
Related Fasteners Specifications
  • Box Count 1
  • SKU BTFP72156
  • UPC 77914060420
  • Power Type Pneumatic
  • Collation Type Glue
  • Gauge 15 Gauge
  • Maximum Fastener Length 2-1/2"
  • Condition New
  • Case/Bag Included Yes
  • Included In Box Air Fitting, Extra No-Mar Tips
  • Manufacturer's Warranty Seven-Year Limited
  • Item Width 3-4/5"
  • Special Features Integrated Air Blower, Integrated Pencil Sharpener
  • Item Height 12"
  • Item Length 14-3/10"
  • Magazine Capacity 129
  • Country of Manufacture Taiwan
  • Item Weight 4.32 lbs.
  • Usage Type Interior
  • Minimum Fastener Length 1-1/4"
  • Housing Material Magnesium
  • Operating Pressure 70 to 120 PSI
  • Firing Type Selective
  • Air Inlet Size 1/4" NPT
  • Air Consumption 1.8 SCFM
  • Depth Control Yes
  • Power Source Air
  • Special Offer Available No
  • Product Degree/Angle 25 Degree
  • Magazine Type Strip
  • Fastener Type FN-Type Angled Finish Nail
Reviews/Q&A

Product Questions

So if the senco nailer uses da nails does this bostitch gun use my FN nails from accuset a250fn? Thanks for all your help. If I buy a new nail gun I want to use up my nails.
4
Customer Reviews
  1. Perfect for baseboard
    Perfect for baseboard and casing. Crown if you hate your painters.

  2. Almost perfect
    It's not an 18 or 16 gauge so expect larger holes. Not much bigger than 16ga. Nice features. 16in gauge for studs, nice angle to work with, not too heavy. Easy to aim with, amazing for baseboard and nailing casing to framing (18 to jamb/extensions...etc). Jammed a couple times, but that's with thousands and thousands of nails going through it....I've yet to meet a nail gun that hasn't jammed at least once. Highly recommend.

  3. a piece of crap
    buy any other finish nailer but this one, and that goes for the other one of the same design, I used it to finish a job, must have shot about 10 -12 21/2 nails and gave it away , really , gave it away. if you look at the dimensions on line you would think it is a good size, real life, feels like a light framing nailer and due to the very large driver pin it may as well be.

Write Your Own Reviews
You're reviewing:Bostitch BTFP72156 FN Smart Point 15 Gauge Angled Finish Nailer, 1-1/4" to 2-1/2"