Everwin PN70CLB Pallet Clinch Nailer, 2-1/4"

$734.99

PRODUCT OVERVIEW

The PN70CLB Pallet Clinch Nailer, 2-1/4" is a patented pneumatic tool that revolutionizes the way string pallets are repaired. This clinch nailer has a 2.3" clinch opening, and is designed to drive 15° Wire Coil Clinch Nails 2-1/4" x 0.113". This tool is engineered to improve operation safety while boosting efficiency for pallet repair clinch nailing applications. The PN70CLB is an industrial tool with a built-in anvil that nails are driven against, which results in nails clinched as intended in pallet repair.

EVERWIN's patented ClinchArm air route ensures the anvil clamps pallet strings firmly before each nail is driven, resulting in an optimal clinch-yield rate. Once the trigger is pulled, the following sequence of motions happen:

1) The PN70CLB's clinch arm is brought upwards by a rear cylinder.

2) The first sequence clamps pallet strings against each other.

3) A nail is driven and clinched against the anvil attached to the clinch arm.

The PN70CLB is lightweight and tough, making it ideal for professional contractors. It features a cap shield to cover airlines and minimize maintenance, a hanger bracket to minimize fatigue, and dust cover to block nails or wire chips. Buy your PN70CLB Clinch Nailer today at Nail Gun Depot!

NOTE: PN70CLB Model is ideal for 1.8" total board thickness.